Wayne-Dalton 2411, 2415 warranty Refer To Strutting Schedule Insert

Page 6

NOTE: SUPPORT BRACKETS

ARE SUPPLIED ON ALL DOORS

REQUIRING DOUBLE END

STILES

An Extra Support Bracket

Will Need To Be Added To

Top Brackets On Double

Endstile Applications

Top bracket installation illustration.

Secure each bracket using (2) 1/4” X 7/8” self-tapping screws. Doors over 16’2” wide or doors over 8 sections high require double top brackets.

Refer To Strutting Schedule Insert.

Secure U-bar to each center stile using (2) 1/4 - 20 X 7/8” TEK Screws

Fig. K

Secure each end of Top Section using (2) 1/4 - 20 X 7/8” TEK Screws and Strut Clips per End

Stile

3” UBar

6” Welded Truss

Secure each end using

(2)1/4 - 20 X 7/8” TEK Screws per stile

STEP 4. Products over 12’2” require U-bars to be secured to each section. Position the 2” or 3” Ubars below the lower hinge leaf and attach with (2) 1/4-20 X 7/8” tek screws (1/2” from section edge) as shown in Fig. K.

Doors requiring trusses, position the truss below the lower hinge leaf (1/2” from the section edge) and secure truss using (2) 1/4”-20 x 7/8” self-drilling and tapping screws per stile. Refer to Fig. K.

Doors requiring (2) welded trusses or 8” truss refer to Auxiliary Installation Instructions.

STEP 5. Leveling Door. (Bottom section) Center and level (or support to a known grade level) the bottom section in the opening, as seen in Fig. L. Temporarily attach the vertical tracks to the jambs. Allow 1/2” clearance between the section and the track as illustrated in the Sideroom illustrations.

It is important that the bottom of each track is in the same level. (shim if necessary)

Products being installed to precast or block must use a 3/8 x 3” long sleeve anchor to attach the verticals to the building. Use the slots in the wall angle as a drill template, drill a 3/8” hole (3-1/2” deep) and secure to anchor.

STEP 6. Installing the Door Sections Secure the end hinges, (one side only) center hinges, and strutting

( if applicable) as previously illustrated. Locate the Lock Section (usually the second) and insert a roller into the end hinge. Stack this section into the opening by hooking the roller in the vertical track and lower onto the bottom section. Insert a roller into the appropriate end hinge and insert into vertical track on the opposite end. Secure to the section using the self-tapping screws. Align the section edges, flip up the upper hinge leafs and secure to the lock section using the self-tapping screws. Continue to hardware and stack the remaining sections in the proper sequence. Attach the top brackets to the upper corners using self drilling and tapping screws as shown in Fig. L.

NOTE : Top section maybe installed now or may wait until the last step (installer preference)

STEP 7. Installing the Vertical Track: Adjust the vertical track to 1/2” spacing from the bottom section and 3/4” at the top section (splice) Refer to page 5. Permanently secure each vertical to the jambs using the following fasteners:

Steel Jambs: 5/16” x 1” self drilling and tapping screw.

Wood Jambs: 5/16” x 1-5/8” lag screw.

Precast or Block: 3/8” x 3” sleeve anchor.

The left hand vertical track assembly indicates the standard fastener spacing.

PG. 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model 2411 Operating Zone Sideroom Requirements Track 1/4 Graduation 8 Sections High or Less Track 1/4 Graduation 9 Sections High or Less Refer To Strutting Schedule Insert Standard Strutting Schedule 15.2 PSF Black RED Left Side Illus Trates Single Endcaps Hardware TWO Springs TWO Springs Split Shaft Page Spring Turn Chart Do not Grease the Inside of the Track Steel Spring Pad Applications FIG. O Model 2411

2411, 2415 specifications

Wayne-Dalton has long been recognized as a leading manufacturer of high-quality garage doors, and among their popular models are the Wayne-Dalton 2415 and 2411. These models are designed to combine durability, aesthetic appeal, and innovative technology, making them suitable for both residential and commercial applications.

The Wayne-Dalton 2415 is known for its robust construction and versatility. Constructed with superior insulation properties, this model features a three-layer construction that includes an outer steel layer, an insulation core, and an inner steel layer. This design not only enhances thermal performance, helping to maintain a consistent indoor temperature and energy efficiency, but also provides excellent soundproofing qualities. The 2415 is available in various styles and colors, allowing homeowners to customize their garage doors to fit their architectural needs.

In contrast, the Wayne-Dalton 2411 offers a more economical solution without compromising on quality. This model features a two-layer construction that still provides adequate insulation and strength, making it ideal for moderate climates. The 2411 is particularly appealing for homeowners looking for a budget-friendly option that doesn’t skimp on style. It comes with a range of finishes and decorative hardware, ensuring that it can enhance the curb appeal of any home.

Both models are equipped with Wayne-Dalton's patented TorqueMaster® system, which features an end-mounted spring design that is enclosed in a solid steel tube. This system offers enhanced safety by eliminating exposed springs, reducing the risk of injury during operation. Additionally, both the 2415 and 2411 are compatible with Wayne-Dalton’s easy-lift panel design, making them easy to operate manually or with an automatic opener.

Safety features are also a priority in these models. They come with pinch-resistant design that minimizes the risk of injury to fingers when the door is in operation. The doors are tested for durability and wear, ensuring that they can withstand the test of time and continue to function without frequent maintenance.

In summary, the Wayne-Dalton 2415 and 2411 garage doors present homeowners with excellent options tailored to varying needs, whether it is maximum insulation, cost-effective solutions, or advanced safety features. Their combination of durability, aesthetic appeal, and cutting-edge technology makes them a standout choice in today's market.
Top Page Image Contents