Thermostat User Guide
Thermostat Control Screen Buttons
Setpoint Up and Down Buttons
Pressing the Up or Down button in the main Thermostat Control Screen will take you to the Heating Setpoint or Cooling Setpoint screen, as shown below.
HEATING SETPOINT
72
Done
Heating
Up and
Cooling
Down Setpoint
setting
buttons
The UP and DOWN buttons adjust the setpoint temperature. Pressing the UP button will increment the setpoint value by one degree and conversely, pressing the Down button will decrement the setpoint one degree. Pressing and holding a button down will cause the setpoint to continuously change until the button is released.
Setpoint Range: The setpoints can be set from 55°F to 90°F (12°C to 32°C) for Heating or 60°F to 99°F (15°C to 37°C) for Cooling.
Setpoint Push: Note that you cannot lower the cooling setpoint below the heating setpoint. The thermostat will push the heating setpoint lower if you try to lower the cooling below the heating setpoint. It maintains a 3 degree separation between the heating and cooling setpoint. The same is true for raising the heating setpoint above the cooling setpoint. Again the thermostat will “push” the cooling setpoint up to maintain the 3 degree separation.
NOTE: If the system mode is OFF, pressing the setpoint Up or Down buttons will take you to the system mode screen. You must set the mode to an operating mode before you can change the setpoints.
To change the Heat Setpoint you must be in Heat mode, to change the Cool Setpoint you must be in the Cool mode.
If you are in Auto mode when you press the Up or Down buttons, you will go to the last call’s mode, heating or cooling, setpoint setting screen.
12