Elinchrom RX 300 Introduction, Style 300RX 600RX 1200RX, FCC Class B Compliance Statement

Page 3

Introduction

The Elinchrom Style RX is manufactured by Elinca S.A. CH -1020 Renens/Switzerland

Dear Photographer,

Thank you for buying your Style RX compact flash unit.

All Elinchrom products are manufactured using the most advanced technology. Carefully selected components are used to ensure the highest quality and the equipment is submitted to many controls both during and after manufacture. We trust that it will give you many years of reliable service.

All Style RX flash units are manufactured for the studio and location use of professional photographers. Only by observance of the information given, can you secure your warranty, prevent possible damage and increase the life of this equipment.

Style 300RX - 600RX - 1200RX

The quality of light and exceptional performance is the result of long research, application of demanding principles, the long experience of ELINCHROM in lighting products for the studio and the utilization of the latest technology in this area.

Totally integrated to the range of the ELINCHROM flashes, the Style 300RX - 600RX - 1200RX units maintain the traditional look and function that is ELINCHROM.

The control provides continuously variable adjustment of the modelling lamp and the flash power with precision over 6 f-stop, from full power 1/1 to 1/32 th.

FCC Class B Compliance Statement

Note:

This equipement has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules and meets all requirements of the Canadian Interference-Causing Equipement Regulations. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipement generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipement does not cause harmful interferences to radio or television reception, which can be determined by turning the equipement off and on, the user is encouraged to correct the interferences by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipement and receiver.

-Connect the equipement into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

ELINCA S.A. is not responsible for any radio or television interference caused by unauthorised modifications of this equipement or the substitution or attachment of connecting cables and equipement other than those specified by ELINCA S.A. The correction of interference caused by such unauthorised modification, substitution or attachment will be the responsibility of the user.

2

Image 3
Contents 120V 20726 Canada 120V 20725.1VS 20726.1VS Version 230VTable of contents Technical data subject to changeIntroduction Style 300RX 600RX 1200RXFCC Class B Compliance Statement Notational Conventions Declaration of conformityDisposal and recycling CE markingTransport Safety noticePower cable Flash Tubes and Modelling lampsOperating instructions Before you startADF Control Panel Overview of controlsMains Fuse Mains SwitchTroubleshooting Mains Supply120V «Canada Version» Modelling lamps and fuses Modelling Light230V Modelling lamps and fuses 120V Modelling lamps and fusesPhotocell Digital Power DisplayOpen flash test Wireless Remote Control and Flash TriggeringAudible recharge signal Sychronisation socketTo replace the Flash tube Flash tube replacementTechnical data FeaturesElinchrom Accessories Elinca sa Guarantee