TABLE OF CONTENTS |
|
SECTION | PAGE |
1.PRODUCT DESCRIPTION | 1 |
1.1 Introduction | 1 |
1.2 Application | 1 |
1.3 Configuration | 1 |
1.4 Temperature Range | 2 |
1.5 Sensor | 2 |
1.6 Remote Alarm | 2 |
2. QUICK START | 3 |
2.1 Overview | 3 |
2.2 Wiring | 3 |
3. OPERATION | 4 |
3.1 Introduction | 4 |
3.2 Alarms | 4 |
3.3 Outputs | 4 |
4. ALARM CALIBRATION | 5 |
4.1 Factory Alarm Calibration | 5 |
4.2 Frequency ofAlarm Calibration Check | 5 |
4.3 Alarm Calibration Check Process | 5 |
4.4 Equipment Required | 6 |
4.5 Alarm Calibration Procedure | 6 |
5. SERVICE |
|
5.1 Sensor Replacement | 7 |
6. INSTALLATION | 8 |
6.1 Gas Sensor Module Locations | 8 |
6.2 Mounting | 8 |
6.3 Wiring | 8 |
6.4 Power Supply | 8 |
6.5Alarm Devices | 8 |
7. ALARM CONFIGURATION | 10 |
8. SPECIFICATIONS | 11 |
9. ACCESSORIES AND REPLACEMENT PARTS | 11 |
10. LIMITED WARRANTY | 11 |
Table of Contents