ResMed s8 manual Fit your mask as described in the mask user instructions

Page 14

START TREATMENT

1Make sure the power is on.

A welcome message is displayed briefly on the LCD screen, then the standby screen appears. In CPAP mode, the standby screen displays the word “RAMP”. In AutoSet mode, the standby screen displays the word “SETTLING”.

The key and LCD backlights also turn on.

2Lie down and arrange the air tubing so that it is free to move if you turn in your sleep.

CAUTION

! • Do not leave long lengths of air tubing around the top of your bed. They could twist around your head or neck while you are sleeping.

• Make sure the area around the flow generator is dry and clean. It should also be clear of bedding, clothes, and other potential blockages.

3Alter the ramp or settling time if required (see “How to Change the Ramp or Settling Time” on page 15).

To start treatment, press the Start/Stop key, unless your clinician has set up your device to start delivering therapy automatically. If so, your device will start when you breathe into your mask (see “SmartStart” for details).

4Fit your mask as described in the mask user instructions.

WARNING

! A mask should not be used unless the S8 AUTOSET SPIRIT device is powered and operating properly.

5When ramping (or settling) begins, the LCD will display the word "RAMPING", (or “SETTLING”) with the current pressure indicated as dashes. Each dash is

approximately equivalent to 2 cmH2O. For example, 6 dashes represents approximately 12 cmH2O pressure.

SMARTSTART™

The S8 AUTOSET SPIRIT has a function called SmartStart™ that your clinician can enable. If SmartStart is enabled, your device will start automatically when you breathe into your mask, and will stop automatically when you take your mask off. This means you do not have to press the Start/Stop key to begin or end treatment.

Note: Do not use SmartStart when using a mask with an anti-asphyxia valve, such as the Mirage Full Face Mask.

8

Page 13 Page 15
Image 14
Page 13 Page 15
Contents S8 AutoSet Spirit System Blank Module S8 AutoSet Spirit System Manufactured by Contents Cleaning and Maintenance Introduction Medical InformationPage Adverse Effects Page S8 Autoset Spirit System You will also need a ResMed mask system supplied separatelyHumidifier HOW to USE the S8 Autoset Spirit Fit your mask as described in the mask user instructions Excelnt Definitions of Mask-Fit Star Rating Star rating HOW to Attach a Humidifier Page HOW to USE the Keypad LCD ScreenPress the Right key Exit HOW to Change the Ramp or Settling Time Page HOW to USE the Standard Menu Autoset WelcomeSettings for mask types Mask HOW to USE the Detailed Menu CpapHOW to Change the Tube Length To change the option to on or OFF Message Description Action S8 Modules Insert the Data Card S8 Modules Page Cleaning and Maintenance Replacing the AIR Filter Frequently Asked Questions What do I do When I Want to GET UP in the NIGHT?Altitude Changes Troubleshooting Problem Possible Cause SolutionProblem Possible Cause Solution System Error Settings Success Remove Card System Specifications Dimensions H x W x D 112 mm x 164 mm x 145 mm Weight 1.3 kgElectromagnetic Compatibility System Specifications Page Recommended separation distance Separation distance according to frequency of transmitter Limited Warranty Product Warranty PeriodPage Index PCB
Related manuals
Manual 39 pages 19.68 Kb Manual 158 pages 44.94 Kb Manual 88 pages 45.08 Kb Manual 47 pages 54.64 Kb Manual 20 pages 25.84 Kb

s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.
Top Page Image Contents