ResMed s8 manual System Error

Page 39

Problem

Possible Cause

Solution

 

 

 

Display error message:

The air tubing is loose or

Check tube!!

blocked.

Key if done

 

Check that the air tubing is connected securely to your mask and the air outlet on the front of the S8 AutoSet Spirit.

When you have checked the air tubing, press the Start/Stop key to restart the device.

If this does not clear the message, disconnect the power cord and then reconnect it to restart the device.

Display error message: Component failure.

Return your S8 AutoSet Spirit for

SYSTEM ERROR

servicing.

Call service!

 

Display error message:

You have experienced

High

leak in

excessively high leak levels

last

session

during the night.

Check that your air tubing is connected properly and that your mask does not leak excessively. Use the mask-fitting feature to help you to fit your mask properly.

If this message appears again, contact your clinician.

Display error message:

You have experienced

HIGH LEAK!!!

excessively high leak levels for

Adjust Mask

more than 20 seconds.

Check that your air tubing is connected properly and that your mask does not leak excessively. Use the mask-fitting feature to help you to fit your mask properly.

If this message appears again, contact your clinician.

Display error message:

Component failure.

Return your S8 AutoSet Spirit for

Exxxx (where xxxx

 

servicing.

defines an error)

 

 

The following message is displayed on the LCD after you try to update settings using the Data Card:

Card Error

Remove Card

The Data Card is not inserted correctly.

The Data Card is only partly inserted.

Ensure that the Data Card is inserted with the arrow facing up and pointing towards the device. Ensure that the device is switched on and in standby mode before you insert the Data Card.

Ensure that the Data Card is inserted into the slot on the Data Card module as far as it will go.

TROUBLESHOOTING 33

Image 39
Contents S8 AutoSet Spirit System Blank Module S8 AutoSet Spirit System Manufactured by Contents Cleaning and Maintenance Medical Information IntroductionPage Adverse Effects Page You will also need a ResMed mask system supplied separately S8 Autoset Spirit SystemHumidifier HOW to USE the S8 Autoset Spirit Fit your mask as described in the mask user instructions Excelnt Definitions of Mask-Fit Star Rating Star rating HOW to Attach a Humidifier Page LCD Screen HOW to USE the KeypadPress the Right key Exit HOW to Change the Ramp or Settling Time Page Autoset Welcome HOW to USE the Standard MenuSettings for mask types Mask Cpap HOW to USE the Detailed MenuHOW to Change the Tube Length To change the option to on or OFF Message Description Action S8 Modules Insert the Data Card S8 Modules Page Cleaning and Maintenance Replacing the AIR Filter What do I do When I Want to GET UP in the NIGHT? Frequently Asked QuestionsAltitude Changes Problem Possible Cause Solution TroubleshootingProblem Possible Cause Solution System Error Settings Success Remove Card Dimensions H x W x D 112 mm x 164 mm x 145 mm Weight 1.3 kg System SpecificationsElectromagnetic Compatibility System Specifications Page Recommended separation distance Separation distance according to frequency of transmitter Product Warranty Period Limited WarrantyPage Index PCB
Related manuals
Manual 39 pages 19.68 Kb Manual 158 pages 44.94 Kb Manual 88 pages 45.08 Kb Manual 47 pages 54.64 Kb Manual 20 pages 25.84 Kb

s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.