ResMed s8 manual Excelnt

Page 15

STOPPING TREATMENT

To stop treatment at any time, remove your mask and press the Start/Stop key or

if your clinician has enabled SmartStart, simply remove your mask and treatment will end.

USING THE MASK-FITTING FEATURE

You can use the S8 AUTOSET SPIRIT mask-fitting feature to help you fit your mask properly. This feature delivers air pressure for a three-minute period, prior to starting treatment, during which you can check and adjust your mask fit to minimise leaks.

Note: Make sure that the mask setting on the MASK screen is the same as the mask you are using.

To use the mask-fitting feature:

1Fit your mask as described in the mask user instructions.

2Hold down the Start/Stop key for at least three seconds until air pressure delivery starts.

The following display will appear on the LCD screen indicating that the mask-fitting feature is operating. Your S8 device will ramp to the mask-fit pressure and will remain at this pressure for three minutes.

The LCD also displays a mask-fit star rating. See “Definitions of Mask-Fit Star Rating” on page 10.

MASK FIT: *****

excelnt

mask-fit star rating

Note: The mask-fit star rating display disappears after three minutes.

The mask-fitting feature can only be started from the RAMP or SETTLING screen.

In AutoSet mode, the mask-fit pressure is the highest pressure that you are likely to receive based on the previous night’s session or 10 cmH2O, whichever is greater.

In CPAP mode, the mask-fit pressure is the set treatment pressure or 10 cmH20, whichever is greater.

3Adjust your mask, mask cushion and headgear until you have a secure and comfortable fit.

Once you have a secure and comfortable fit, check your mask-fit star rating on the LCD screen. Table 4 explains the mask-fit star ratings.

Note: If there is another person nearby to check your mask-fit star rating, you can adjust your mask, mask cushion and headgear while lying down.

HOW TO USE THE S8 AUTOSET SPIRIT

9

Page 14 Page 16
Image 15
Page 14 Page 16
Contents S8 AutoSet Spirit System Blank Module S8 AutoSet Spirit System Manufactured by Contents Cleaning and Maintenance Medical Information IntroductionPage Adverse Effects Page You will also need a ResMed mask system supplied separately S8 Autoset Spirit SystemHumidifier HOW to USE the S8 Autoset Spirit Fit your mask as described in the mask user instructions Excelnt Definitions of Mask-Fit Star Rating Star rating HOW to Attach a Humidifier Page LCD Screen HOW to USE the KeypadPress the Right key Exit HOW to Change the Ramp or Settling Time Page Autoset Welcome HOW to USE the Standard MenuSettings for mask types Mask Cpap HOW to USE the Detailed MenuHOW to Change the Tube Length To change the option to on or OFF Message Description Action S8 Modules Insert the Data Card S8 Modules Page Cleaning and Maintenance Replacing the AIR Filter What do I do When I Want to GET UP in the NIGHT? Frequently Asked QuestionsAltitude Changes Problem Possible Cause Solution TroubleshootingProblem Possible Cause Solution System Error Settings Success Remove Card Dimensions H x W x D 112 mm x 164 mm x 145 mm Weight 1.3 kg System SpecificationsElectromagnetic Compatibility System Specifications Page Recommended separation distance Separation distance according to frequency of transmitter Product Warranty Period Limited WarrantyPage Index PCB
Related manuals
Manual 39 pages 19.68 Kb Manual 158 pages 44.94 Kb Manual 88 pages 45.08 Kb Manual 47 pages 54.64 Kb Manual 20 pages 25.84 Kb

s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.
Top Page Image Contents