Using the dehumidifier, How the Dehumidifier Operates

Using the dehumidifier.

ge.com

When first using the dehumidifier, operate the unit continuously 24 hours.

How the Dehumidifier Operates

Automatic Defrost

Safety Instructions

Moist, humid air is drawn over a cold refrigerated dehumidifying coil. Moisture in the air condenses on this coil and drains into a bucket (or through a hose and drain).

Dry, clean air is drawn through the condenser where it is heated and discharged out the front grille into the room.

It is normal for the surrounding air to become slightly warmer as the dehumidifier operates.

This warming effect further reduces the relative humidity of the surrounding air.

When frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run until the frost disappears.

When the coil is defrosted, the compressor or fan (depending on model) will automatically restart and dehumidifying will resume.

Operating Instructions

Choosing a Location

A dehumidifier operating in a basement will have little or no effect in drying an adjacent enclosed storage area, such as a closet, unless there is adequate circulation of air in and out of the area.

■Do not use outdoors.

■This dehumidifier is intended for indoor residential applications only. This dehumidifier should not be used for commercial or industrial applications.

■Place the dehumidifier on a smooth, level floor strong enough to support the unit with a full bucket of water.

■Allow at least 12–18 inches of air space on all sides of the unit for good air circulation.

■Place the dehumidifier in an area where the temperature will not fall below 41°F (5°C). The coils can become covered with frost at temperatures below 41°F, which may reduce performance.

■Use the dehumidifier in cooking, laundry, bathing and dishwashing areas that have excessive moisture. NOTE: Place the dehumidifier away from the clothes dryer.

■Use the dehumidifier to prevent moisture damage anywhere books or valuables are stored.

■Use the dehumidifier in a basement to help prevent moisture damage.

■The dehumidifier must be operated in an enclosed area to be most effective.

■Close all doors, windows and other outside openings to the room.

YESNO

✓

12–18″min.

NOTE: The dehumidifier has rollers to aid placement, but it should only be rolled on smooth, flat surfaces. Do not attempt to roll the dehumidifier on carpet or over objects.

Care and Cleaning Troubleshooting Tips Consumer Support

AHM30, AHM65*, AHM40 specifications

The GE AHM series consists of advanced hybrid propulsion systems designed for a variety of aircraft applications. The AHM30, AHM40, and AHM65 models feature cutting-edge technologies that enhance performance, efficiency, and reliability in demanding aviation environments.

The GE AHM30 model is tailored for smaller regional aircraft and offers a compact footprint while delivering impressive power output. With a maximum thrust capability of approximately 3,000 pounds, the AHM30 is equipped with an efficient turbofan engine that utilizes advanced materials to reduce weight and increase durability. The hybrid architecture of the AHM30 allows for seamless transitions between electric and traditional fuel sources, resulting in lower fuel consumption and emissions.

Moving up the range, the GE AHM40 model is designed for medium-sized commercial jets and offers a balance of power and efficiency. This model boasts a thrust range from 5,000 to 7,000 pounds, making it suitable for longer regional routes and short-haul international flights. The AHM40 incorporates next-generation noise reduction technologies, ensuring compliance with stringent environmental regulations while providing a quieter cabin experience for passengers. Enhanced avionics and control systems also significantly improve flight safety and operational flexibility.

The most powerful in the series, the GE AHM65, is engineered for larger aircraft and boasts a thrust output of up to 10,000 pounds. This model is particularly effective for operations in high-demand environments, such as cargo transport and military applications. The AHM65’s hybrid propulsion system features robust electrical systems that can power auxiliary devices, reducing the reliance on traditional fuel systems and paving the way for sustainable aviation practices. Additionally, the AHM65 offers superior thrust-to-weight ratios, enabling better climb performance and efficiency during all stages of flight.

All three models in the GE AHM series leverage advanced diagnostic and monitoring technologies, allowing operators to maximize uptime and minimize maintenance costs. With real-time data analytics, operators can track system performance, predict maintenance needs, and ensure optimal operation throughout the aircraft’s lifecycle.

In summary, the GE AHM30, AHM40, and AHM65 stand out in the aviation industry with their innovative hybrid technologies, fuel-efficient designs, and commitment to sustainability. Their impressive performance characteristics make them suitable for a wide range of applications, from regional air travel to heavier cargo and military missions, representing the future of efficient aviation propulsion systems.