GE AHM40, AHM65* Troubleshooting Tips Care and Cleaning Operating, Consumer Support, Water Level

Page 6

Instructions Safety Instructions

Using the dehumidifier.

Always make sure the water bucket is locked into place on the dehumidifier.

Removing Collected Water

There are 2 ways to remove collected water:

4. Secure the nozzle to the back of the unit

Use the bucket. When the bucket is removed,

with the two screws provided.

the unit will shut off. Empty and replace the

 

bucket.

 

Troubleshooting Tips Care and Cleaning Operating

NOTE: Support bucket with both hands when emptying.

IMPORTANT: Do not use the drain tube if using the bucket to collect water. When the drain tube is connected, water will flow through it onto the floor instead of into the bucket.

NOTES:

■Do not remove the bucket while the dehumidifier is operating or if it has just stopped operating. This might cause some water to drip from the drain pan.

■The bucket must be in place and securely seated for the dehumidifier to operate.

Use a hose. Water can be automatically emptied into a floor drain by attaching the unit’s drain tube with nozzle and a garden water hose (not included).

1.Remove the bucket from the front of the unit.

2.Remove the plug cover from the back of the unit and store it in a safe location.

3.Insert the tube through the hole in the back of the unit and securely press it onto the connector on the front of the unit. Push the tube around the front connector until the nozzle is flush with the back of the unit.

Back of unit

5.Cut (as needed) and thread a garden hose (not supplied) onto the nozzle and lead it to the floor drain.

Back of unit

6.Replace the bucket in the unit.

NOTE: The bucket must be in place and securely seated for the dehumidifier to operate.

Consumer Support

Insert tube through

hole in back of unit.

Back of unit

Firmly press the tube

onto the front connector.

Front of unit

Water Level

 

The dehumidifier will turn off automatically

The bucket must be replaced in the proper position for

 

when the bucket is full, or when the bucket is

the dehumidifier to work. The light will be on and the

6

removed or not replaced in the proper position.

dehumidifier will not run if the bucket is not in the

 

 

proper position.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Dehumidifiers Safety Precautions HOW to Connect ElectricityDo not use an adapter plug with this appliance What dehumidifier do you need? USE of Extension CordsOperating Ge.comAbout the controls on the dehumidifier CleaningTroubleshooting Tips Care Consumer SupportChoosing a Location Using the dehumidifierHow the Dehumidifier Operates Automatic DefrostRemoving Collected Water Troubleshooting Tips Care and Cleaning OperatingConsumer Support Water LevelWater Bucket Care and cleaning of the dehumidifierGrille and Case Air FilterDehumidifier does not DehumidifierDoes not start Dry the air as it shouldGe.com Page What Is Not Covered GE Dehumidifier-One Year Limited WarrantyOrder to Make a Warranty Claim We Will ReplaceReal Life Design Studio Parts and AccessoriesConsumer Support GE Appliances Website Contact UsManual del Propietario¡ADVERTENCIA Precauciones DE SeguridadUSO DE Cables DE Extensión Solución de problemas Ayuda al clienteComo Conectar LA Electricidad OperaciónSeguridad Solución de problemas Cuidado y limpiezaAcerca de los controles del deshumedificador Ayuda al clienteCómo funciona el deshumedificador Cuidado y limpieza Solución de problemas Ayuda al clienteCómo usar el deshumedificador Selección del lugar adecuadoNivel de agua Ayuda al clienteCómo desechar el agua acumulada Hay 2 formas de desechar el agua acumuladaCuidado y limpieza del deshumedificador Precaución no Opere elSeguridad Operación Ideas para la identificación y solución de problemas… 500 1000 ¿Qué deshumedificador necesita?Condición sin deshumedificación Área en pies cuadrados 2000Notas Para hacer un reclamo de garantía Cuidado y limpieza SoluciónPor el período de Nosotros reemplazaremos Lo que no está cubiertoAyuda al cliente Página Web de GE Appliances Piezas y accesoriosPóngase en contacto con nosotros

AHM30, AHM65*, AHM40 specifications

The GE AHM series consists of advanced hybrid propulsion systems designed for a variety of aircraft applications. The AHM30, AHM40, and AHM65 models feature cutting-edge technologies that enhance performance, efficiency, and reliability in demanding aviation environments.

The GE AHM30 model is tailored for smaller regional aircraft and offers a compact footprint while delivering impressive power output. With a maximum thrust capability of approximately 3,000 pounds, the AHM30 is equipped with an efficient turbofan engine that utilizes advanced materials to reduce weight and increase durability. The hybrid architecture of the AHM30 allows for seamless transitions between electric and traditional fuel sources, resulting in lower fuel consumption and emissions.

Moving up the range, the GE AHM40 model is designed for medium-sized commercial jets and offers a balance of power and efficiency. This model boasts a thrust range from 5,000 to 7,000 pounds, making it suitable for longer regional routes and short-haul international flights. The AHM40 incorporates next-generation noise reduction technologies, ensuring compliance with stringent environmental regulations while providing a quieter cabin experience for passengers. Enhanced avionics and control systems also significantly improve flight safety and operational flexibility.

The most powerful in the series, the GE AHM65, is engineered for larger aircraft and boasts a thrust output of up to 10,000 pounds. This model is particularly effective for operations in high-demand environments, such as cargo transport and military applications. The AHM65’s hybrid propulsion system features robust electrical systems that can power auxiliary devices, reducing the reliance on traditional fuel systems and paving the way for sustainable aviation practices. Additionally, the AHM65 offers superior thrust-to-weight ratios, enabling better climb performance and efficiency during all stages of flight.

All three models in the GE AHM series leverage advanced diagnostic and monitoring technologies, allowing operators to maximize uptime and minimize maintenance costs. With real-time data analytics, operators can track system performance, predict maintenance needs, and ensure optimal operation throughout the aircraft’s lifecycle.

In summary, the GE AHM30, AHM40, and AHM65 stand out in the aviation industry with their innovative hybrid technologies, fuel-efficient designs, and commitment to sustainability. Their impressive performance characteristics make them suitable for a wide range of applications, from regional air travel to heavier cargo and military missions, representing the future of efficient aviation propulsion systems.
Top Page Image Contents