Alen MDF-70AE Electrical Information, Do not use extension cords or an adapter plugs with this

Page 4

SAFETY PRECAUTIONS

Do not cover the intake or exhaust openings with cloths or towels.

A lack of air flow can lead to overheating and fire.

!

When the unit is to be

 

cleaned, switch off, and turn

 

off the circuit breaker.

Do not clean unit when power is on as it may cause fire and electric shock, it may cause an injury.

!

Always insert the filters

 

 

securely. Clean filter

 

once every two weeks.

Operation without filters may cause failure.

!CAUTION

!Care should be taken when using the unit in a room with the following persons:

Infants, children, elderly people, and people not senstive to humidity.

Do not place heavy object on the power cord and take care so that the cord is not compressed.

There is danger of fire or electric shock.

!

If water enters the unit, turn

 

the unit off and disconnect the

 

power , contact a qualified

 

service technician.

 

It may cause failure of

 

appliance or accident.

Do not use in areas where chemicals are handled.

This will cause the unit deterioration due to chemicals and solvents dissolved in the air.

Do not climb up on or sit on the unit.

You may be injured if you fall or if the unit falls over.

Do not place flower vases or other water container on top of the unit.

Water may spill inside the unit, causing insulation failure and electrical shock or fire.

Do not, under any circumstances, cut, remove, or bypass the grounding prong.

This unit is grounded through the power cord plug when plugged into a matching wall outlet.

Electrical Information

The manufactures nameplate is located on the rear panel of

the unit and contains electrical and other technical data

specific to this unit.

Be sure the air conditioner is properly grounded. To minimize

shock and fire hazards, proper grounding is important. The

power cord is equipped with a three-prong grounding plug

for protection against shock hazards.

Your air conditioner must be used in a properly grounded wall

receptacle. If the wall receptacle you intend to use is not

adequately grounded or protected by a time delay fuse or

circuit breaker, have a qualified electrician install the proper

receptacle.

Ensure the receptacle is accessible after the unit installation.

Do not use extension cords or an adapter plugs with this

unit. However, if it is necessary to use an extension cord, use an approved air conditioner extension cord only (available at most local hardware stores).

To avoid the possibility of personal injury, always disconnect the power supply to the unit, before installing and/or servicing.

3

Image 4
Contents Dehumidifier Contents Lack of ventilation can cause overheating and fire Never do this Always do thisElectrical Information Do not use extension cords or an adapter plugs with thisControl pads Identification of parts Front RearWhen using the unit Positioning the unitRemoving the collected water Continuous drainingCare and cleaning of the dehumidifier Unit does not start Dehumidifier does not dry the air as it shouldPage 220266A044

MDF-50AE, MDF-70AE, MDF1-30AE specifications

Alen Air Purifiers have established themselves as reliable solutions for improving indoor air quality. Among the prominent models in their lineup are the MDF-50AE, MDF1-30AE, and MDF-70AE, each catering to different needs while sharing core technologies and features aimed at cultivating a healthier living environment.

The Alen MDF-50AE is designed for medium-sized spaces, making it an ideal choice for living rooms, bedrooms, or medium-sized offices. This model utilizes a powerful HEPA filtration system that traps 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, pet dander, and smoke. With a CADR (Clean Air Delivery Rate) of approximately 200 cubic feet per minute, it effectively circulates and purifies air quickly, ensuring a fresh and clean atmosphere. The MDF-50AE also boasts a whisper-quiet operation, allowing users to enjoy cleaner air without disruptive noise.

Next in line is the MDF1-30AE, a compact model designed for smaller rooms or personal spaces. Weighing just a few pounds, it offers portability without sacrificing performance. This purifier also uses a HEPA filter, ensuring high-efficiency particle removal. Its design includes an intuitive interface with adjustable fan speeds, allowing users to customize their air purification experience. Ideal for bedrooms, nurseries, or small offices, the MDF1-30AE is a cost-effective solution that doesn’t compromise on quality, making it highly popular among those with limited space.

For larger areas, the MDF-70AE stands out with its enhanced capabilities. Featuring an impressive CADR rating, this model efficiently tackles larger airborne contaminants, making it ideal for open floor plans or expansive living areas. The MDF-70AE is equipped with advanced filtration technologies that not only include HEPA filters but also activated carbon layers for odor control. Its smart technology monitors air quality in real time, automatically adjusting the fan speed based on detected pollution levels.

In summary, whether it’s the MDF-50AE’s efficiency for medium spaces, the MDF1-30AE’s compact design for personal use, or the MDF-70AE’s powerful performance for large areas, Alen Air Purifiers deliver on their promise to enhance indoor air quality. Each model comes integrated with user-friendly features and advanced filter technology, ensuring that everyone can find a solution to meet their specific air purification needs.