Alen MDF1-30AE, MDF-70AE, MDF-50AE manual Care and cleaning of the dehumidifier

CARE AND MAINTENANCE

Care and cleaning of the dehumidifier

Turn the dehumidifier off and remove the plug from the wall outlet before cleaning.

1. Clean the Grille and Case

Use water and a mild detergent. Do not use bleach or abrasives.

Do not splash water directly onto the main unit. Doing so may cause an electrical shock, cause the insulation to deteriorate, or cause the unit to rust.

The air intake and outlet grilles get soiled easily, so use a vacuum attachment or brush to clean.

2. Clean the bucket

Every few weeks, clean the bucket to prevent growth of mold, mildew and bacteria. Partially fill the bucket with clean water and add a little mild detergent. Swish it around in the bucket, empty and rinse.

NOTE: Do not use a dishwasher to clean the bucket. After clean, the bucket must be in place and securely seated for the dehumidifier to operate.

3. Clean the air filter

The air filter behind the front grille should be checked and cleaned at least every 30 days or more often if necessary.

NOTE: DO NOT RINSE OR PUT THE FILTER

IN AN AUTOMATIC DISHWASHER.

To remove:

Grip the tab on the filter and pull it out as shown in Fig.A.

Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it. Do not clean the filter in a dishwasher.

To attach:

Insert the air filter into the unit from the side and push it in. See Fig.C

CAUTION:
DO NOT operate the dehumidifier without a filter	Band
because dirt and lint will clog it and reduce
performance.

4. When not using the unit for long time periods

After turning off the unit, wait one day before emptying the tank.

Clean the main unit, bucket and air filter.

Wrap the cord and bundle it with the band or twist the excess cord onto the power cord hook(depending on models). Cover the unit with a plastic bag.

Store the unit upright in a dry, well-ventilated place.

Household
Drain
Cleaner	No

Fig. A

Fig. B

Fig. C

Power cord

8