HOW to Install Your GAS LOG SET

This log set must be installed by a qualified person and instructions must be followed exactly to ensure safe operation.

Your log set is packaged in three (3) boxes. The complete burner assembly is packaged in one box and the logs are packaged in separate boxes.

GENERAL INSTALLATION

These logs require a minimum permanent free opening as stated in the chart on page 3 of these instructions, that must be provided by either the fireplace chimney or the fireplace damper to vent the gases. The chimney damper must be fixed in a manner which will maintain the minimum permanent vent opening at all times. This may be accomplished by installing a screw bolt in the edge of the damper to prevent its closing or by a hole(s) in the damper. These logs must be installed only in a vented fireplace with a working flue and constructed of noncombustible material. The minimum size fireplace in which these logs are to be installed is:

Log Set Size	Depth	Height	Front Opening Width

18”	14”	18”	25”

24”	14”	18”	36”

BURNER ASSEMBLY AND INSTALLATION

1.Turn off gas supply to fireplace.

2.Ensure that fireplace is clean.

3.Remove complete burner assembly from box and place complete burner assembly on floor of fireplace with the open side of the bottom pan facing the front of the fireplace.

4.Position the burner assembly centered from side to side and as far toward the back of the fireplace as possible. The fireplace will draft better with the burner unit toward the back of the fireplace. (Never place the burner assembly more toward the front in larger fireplaces.)

5.Remove logs from log box and place on burner assembly as described on page 5 under Log Placement.

6.Visually inspect the position of gas log set in the fireplace as described above.

7.After you have visually inspected the position of the log set in the fireplace, remove logs from burner assembly and proceed to connect gas supply.

CONNECTING GAS SUPPLY

There is a 3/8 flared fitting installed on your gas log set at the factory. Be sure fittings are the appropriate size on any tubing that is to be connected to your gas log set. If using tubing that has to be cut and shaped, be sure to use the proper tubing cutter and flaring tool. Also, be careful not to crimp the tubing when it is being bent to hook up the log set. A crimp in this line could restrict the gas flow to the log set. If a crimp does occur, do not use the gas line. Gas resistant pipe compound must be used on all threaded male connections, except brass to brass.

NOTE: During the first 2 to 3 hours of burning, the flame burning against the glowing log will appear to be orange in color. After this burn in period this flame will turn completely blue and almost invisible. You will then see mostly glow and no flame on the face of this glowing log, which enhances the glow appearance.

Gas Burner specifications

The Heatmaster Gas Burner is designed for efficiency and performance, making it a popular choice among both residential and commercial users. This innovative burner offers advanced features that enhance its operation and ensure optimal heating solutions.

One of the main features of the Heatmaster Gas Burner is its high thermal efficiency. With an impressive ability to convert gas into heat, these burners maximize energy usage, resulting in lower utility bills and reduced environmental impact. The burner’s design minimizes heat loss, ensuring that more of the generated heat is directed towards its intended purpose.

Equipped with cutting-edge technology, the Heatmaster Gas Burner incorporates a modulating gas valve. This feature allows for precise control over the flame size and heat output, leading to improved temperature regulation. Users can adjust the flame according to their specific needs, providing flexibility in a variety of applications, from cooking to space heating.

The burner also showcases a reliable ignition system, enabling quick and safe starts. This technology eliminates the need for traditional matches or lighters, offering peace of mind to users. Additionally, the Heatmaster Gas Burner is designed with safety in mind, featuring built-in flame detection and automatic shut-off capabilities that activate in case of irregularities in the burner’s operation.

Another notable characteristic of the Heatmaster Gas Burner is its durable construction. Made from high-quality materials, it withstands high temperatures and is resistant to corrosion, ensuring longevity and minimal maintenance. Its robust design makes it suitable for various environments, including both indoor and outdoor use.

Ease of installation is yet another feature that sets the Heatmaster Gas Burner apart from others in the market. Its user-friendly design allows for straightforward installation, making it accessible for both professionals and DIY enthusiasts.

In conclusion, the Heatmaster Gas Burner combines high efficiency, advanced technology, and durable construction, making it an ideal choice for those seeking reliable heating solutions. Its features not only promote energy savings but also enhance safety and ease of use, making it a top choice for various heating applications. Whether for residential cooking or heating large commercial spaces, the Heatmaster Gas Burner delivers exceptional performance and reliability.