Heatmaster Gas Burner General Information, Venting System Maintenance, Cleaning Your GAS LOG SET

Page 2

GENERAL INFORMATION

+A fireplace screen must be in place when logs are operating and, unless other provisions for combustion air are provided, the screen must have an opening(s) for the introduction of combustion air.

+If glass doors are used with this log set, open doors fully when unit is operating.

+Open damper according to the chart on page 3 of these instructions (or fully open) and be sure damper stop clamp is installed. (See damper stop instructions listed on page 5.) Gas supply pipe must be 1/2” minimum I.D. or larger (3/4” if gas line is longer than 20 feet). The minimum inlet gas supply pressure for the purpose of input adjustment is 7 inches for natural gas and 11 inches for LP gas. The maximum inlet gas supply pressure is 10.5 inches for natural gas and 13 inches for LP gas.

+Solid fuels shall not be burned in a fireplace where a decorative appliance is used.

+The installation and provisions for combustion and ventilation air must conform with the National Fuel Gas Code, ANSI Z223.1.

+The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa).

+The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

+KEEP APPLIANCE AREA CLEAR AND FREE FROM COMBUSTIBLE MATERIALS, GASOLINE AND OTHER FLAMMABLE VAPORS AND LIQUIDS.

+Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

VENTING SYSTEM MAINTENANCE

An annual examination and cleaning of the venting system by a qualified person is recommended.

CLEANING YOUR GAS LOG SET

Periodically you may want to remove the soot build-up on the logs by lightly brushing the logs with a soft brush. Also, occasionally, visually inspect your burner pan and pilot for proper operation (Fig. 1 and Fig. 2 below).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 1

 

Fig. 2

2

Image 2
Contents For Your Safety For Your Safety What to do if YOU Smell GASGeneral Information Venting System MaintenanceCleaning Your GAS LOG SET Chimney Height Feet Log Set Burner Assembly and Installation HOW to Install Your GAS LOG SETGeneral Installation Connecting GAS SupplyLOG Placement Sand and Glowing Ember Placement Natural GASVermiculite and Glowing Ember Placement LP GAS Damper StopLOG Placement Photos CHML-18 CHML-24To Turn OFF GAS to Appliance For Your Safety Read Before LightingLighting Instructions Safety Pilot Valve Lighting Instructions Manual Valve Lighting Instructions Rotary Control Valve Operation of the Remote Control and Wall Switch Remote ControlWall Switch Parts List Description

Gas Burner specifications

The Heatmaster Gas Burner is designed for efficiency and performance, making it a popular choice among both residential and commercial users. This innovative burner offers advanced features that enhance its operation and ensure optimal heating solutions.

One of the main features of the Heatmaster Gas Burner is its high thermal efficiency. With an impressive ability to convert gas into heat, these burners maximize energy usage, resulting in lower utility bills and reduced environmental impact. The burner’s design minimizes heat loss, ensuring that more of the generated heat is directed towards its intended purpose.

Equipped with cutting-edge technology, the Heatmaster Gas Burner incorporates a modulating gas valve. This feature allows for precise control over the flame size and heat output, leading to improved temperature regulation. Users can adjust the flame according to their specific needs, providing flexibility in a variety of applications, from cooking to space heating.

The burner also showcases a reliable ignition system, enabling quick and safe starts. This technology eliminates the need for traditional matches or lighters, offering peace of mind to users. Additionally, the Heatmaster Gas Burner is designed with safety in mind, featuring built-in flame detection and automatic shut-off capabilities that activate in case of irregularities in the burner’s operation.

Another notable characteristic of the Heatmaster Gas Burner is its durable construction. Made from high-quality materials, it withstands high temperatures and is resistant to corrosion, ensuring longevity and minimal maintenance. Its robust design makes it suitable for various environments, including both indoor and outdoor use.

Ease of installation is yet another feature that sets the Heatmaster Gas Burner apart from others in the market. Its user-friendly design allows for straightforward installation, making it accessible for both professionals and DIY enthusiasts.

In conclusion, the Heatmaster Gas Burner combines high efficiency, advanced technology, and durable construction, making it an ideal choice for those seeking reliable heating solutions. Its features not only promote energy savings but also enhance safety and ease of use, making it a top choice for various heating applications. Whether for residential cooking or heating large commercial spaces, the Heatmaster Gas Burner delivers exceptional performance and reliability.