For Your Safety Read Before Lighting

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

+Do not try to light any appliance.

+Do not touch any electrical switch; do not use any phone in your building.

+Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

+If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control handle, Never use tools. If the handle will not push in or turn by hand, do not try to repair it. Call a qualified service technician. Force or attempted repair may result in fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

SAFETY PILOT VALVE

1.STOP! Read the safety information previously listed above.

2.Turn gas control handle clockwise to the “OFF” position.

3.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information above on this label. If you don’t smell gas, go to the next step.

4.Locate pilot (Fig. 8) in the center behind the middle stainless steel burner underneath the middle log.

5. Turn control handle counterclockwise

to the “PILOT” position (Fig. 7).

6.Place a lit match at the pilot burner and simultaneously push in the control handle. This should ignite the pilot.

7.Once the pilot lights continue to depress the control handle for one (1) minute.

8.After one minute slowly release the control handle and it will pop back out. Pilot should remain lit. It it goes out, repeat steps 1 thru 8.

+If the handle does not pop out when released, stop and immediately call your service technician or gas supplier.

+If the pilot will not stay lit after several tries, turn the gas control handle to “OFF” and call your service technician or gas supplier.

9.Turn control handle counterclockwise to “ON”.

TO TURN OFF GAS TO APPLIANCE

Turn control handle clockwise to the “OFF” position. Do not force.

Fig. 7	Fig. 8

Gas Burner specifications

The Heatmaster Gas Burner is designed for efficiency and performance, making it a popular choice among both residential and commercial users. This innovative burner offers advanced features that enhance its operation and ensure optimal heating solutions.

One of the main features of the Heatmaster Gas Burner is its high thermal efficiency. With an impressive ability to convert gas into heat, these burners maximize energy usage, resulting in lower utility bills and reduced environmental impact. The burner’s design minimizes heat loss, ensuring that more of the generated heat is directed towards its intended purpose.

Equipped with cutting-edge technology, the Heatmaster Gas Burner incorporates a modulating gas valve. This feature allows for precise control over the flame size and heat output, leading to improved temperature regulation. Users can adjust the flame according to their specific needs, providing flexibility in a variety of applications, from cooking to space heating.

The burner also showcases a reliable ignition system, enabling quick and safe starts. This technology eliminates the need for traditional matches or lighters, offering peace of mind to users. Additionally, the Heatmaster Gas Burner is designed with safety in mind, featuring built-in flame detection and automatic shut-off capabilities that activate in case of irregularities in the burner’s operation.

Another notable characteristic of the Heatmaster Gas Burner is its durable construction. Made from high-quality materials, it withstands high temperatures and is resistant to corrosion, ensuring longevity and minimal maintenance. Its robust design makes it suitable for various environments, including both indoor and outdoor use.

Ease of installation is yet another feature that sets the Heatmaster Gas Burner apart from others in the market. Its user-friendly design allows for straightforward installation, making it accessible for both professionals and DIY enthusiasts.

In conclusion, the Heatmaster Gas Burner combines high efficiency, advanced technology, and durable construction, making it an ideal choice for those seeking reliable heating solutions. Its features not only promote energy savings but also enhance safety and ease of use, making it a top choice for various heating applications. Whether for residential cooking or heating large commercial spaces, the Heatmaster Gas Burner delivers exceptional performance and reliability.