Maintenance2 5
Bi-Weekly Maintenance (or every 10 bags of pellets)
Clean the Heat Exchange Tubes
WARNING:
The front of the heater becomes very hot during operation. Wait until the heater has cooled before cleaning the heat exchange tubes.
With the door closed, insert the included tool into the hole on the heat exchanger cleaning rod. Move the heat exchange cleaner up and down several times.
Heat Exchanger
Cleaning Rod
Keep the door closed so the flyash does not enter the room.
Vacuum Hopper
Run the heater until the pellets run out. Open the hopper and vacuum out the entire hopper. The dust and any other debris near the bottom should be removed to prevent excessive
Cleaning the Optional Plated Surfaces
Fingerprints or other marks left on the plated surfaces may become etched in place if they are not wiped clean prior to turning the stove on. Clean the surface with denatured alcohol and a soft cloth (make sure the heater is cool). Other cleaners may leave a film that may dull the finish.
Travis Industries | 4 0 5 0 5 0 9 | 1 0 0 - 0 1 1 4 5 |