![](/images/new-backgrounds/1058516/5851675x1.webp)
3 8Optional Equipment
Remote Thermostat (Part # 99300653)
•Follow the instructions included with the remote thermostat for installation and operation.
Optional Log (Part # 98900126)
!Make sure the heater has fully cooled before installation.
1Open the door (see the instructions included with the owner’s manual.
2Attach the two log shelf legs to the cross brace with the four included nuts. Make sure to use the correct leg for each side.
•Install the log shelf assembly and log following the directions below.
b | Center the log on the log shelf and |
| push it back so it rests against |
| these two tabs. |
Left Log Shelf Leg
Right Log Shelf Leg
Nuts
Log Shelf Cross Brace
3/8" Nutdriver
aPlace the log shelf assembly so the back edge contacts the cast firebrick in the rear of the firebox. Note how the taper on the assembly matches the taper on the cast firebrick.
NOTE:
On inserts, the ash box must be installed before placing the log shelf assembly.
When in place, the log should appear as shown in the photograph to the right.
Travis Industries | 4 0 5 0 5 0 9 | 1 0 0 - 0 1 1 4 5 |