![](/images/new-backgrounds/1058516/5851631x1.webp)
1 6Installation
Installation into a Factory Built (Metal)
“L” Vent
Vertical Cap
Cover Plate
“L” Vent Flex Section
The smoke shelf, shields, damper, and baffles may be removed if attached with mechanical fasteners.
The firebrick (refractory) may be removed.
HINT:
Paint the interior of the fireplace with latex paint to prevent fireplace odors from entering the home.
Storm Collar | Seal the cover |
| |
| plate with silicone. |
| The log grate, |
| screen (and rails), |
| and doors (if |
| present) must be |
| removed |
NOTE: The fixed spacers under the appliance may not be removed.
The metal sides, frame members, or other structural components of the factory built fireplace may not be removed or altered.
The metal floor of the firebox may be removed leaving the fireplace floor outer wrap.
Use the telescoping legs to support the insert on raised fireplaces.
Travis Industries | 4 0 5 0 5 0 9 | 1 0 0 - 0 1 1 4 5 |