Napoleon Fireplaces GDIZC-P, GDIZC-N manual Optional Blower Installation, White

Page 10

10

OPTIONAL BLOWER INSTALLATION

b l

a

c

k

white

FIGURE 21

d re

THERMODISC

B R A C K E T

ASSEMBLY

FIGURE 24

BLOWER WIRES

1.Turn off the electrical power and the gas supply to the fireplace insert.

2.Remove the fire viewing door. Remove the logs.

FIGURE 22

4.Disconnect the two blower wires. Remove the blower bracket secured with one wing nut and lock washer.

For thermodisc replacement: Remove the "Z" shaped mounting bracket secured to the firebox wall to the left of the blower. Remove the thermodisc from the bracket and replace.

3.Detach the two screws from the back of the firebox and remove the panel, as illustrated.

BLOWER ACCESS DOOR

FIGURE 23

BC

A

FIGURE 25

FIGURE 26

5.Replace the blower using the existing bracket. Slide the vibration reducing pad (A) into the clip (C) and up against the threaded stud (B) at the other end. The blower must be able to be positioned entirely onto the pad.

Slide the blower into the clip (C). Secure to the threaded stud using the existing lock washer and wing nut. Ensure that the blower does not touch the fireplace base or the firebox.

6.Reconnect the two wires. Holding the replacement gas- ket in place, reattach the blower access door and panel. Replace the logs. Re-install the fire viewing door.

7.Turn the gas supply and electricity back on.

4.Remove the blower access door held on with the re- maining 8 screws. Replace the blower access door gas- ket when changing the blower.

Because the blower is thermally activated, when turned on, it will automatically start approximately 5-15 min- utes after lighting the fireplace insert and will run for approximately 30-45 minutes after the fireplace insert has been turned off. Use of the fan increases the out- put of heat.

Drywall dust will penetrate into the blower bearings caus- ing irreparable damage and must be prevented from coming into contact with the blower or its compartment. Any damage resulting from this condition is not cov- ered by the warranty policy.

W415-0223 / D / 01.12.04

Page 9 Page 11
Image 10
Page 9 Page 11
Contents GAS-FIRED Direct Vent Insert Table of Contents Napoleon GAS Fireplace Presidents Lifetime Limited Warranty General Information General InstructionsCare of GLASS, and Plated Parts Sided Backer Plate Front View InstallationSided Backer Plates Side Views TOP View Insert Vent Connection Chimney ConnectionFinishing Logo Placement LOG PlacementDoor Installation Mantle ClearanceOperating Instructions Operation / MaintenanceMaintenance Purge the GAS Line with the Glass Door OpenOptional Blower Installation WhiteAdjustments Replacements Replacement PartsW415-0223 / D Trouble Shooting Guide Symptom Problem Test SolutionRefer to Main Burner Goes OUT Pilot Stays on Fireplace Service History
Related manuals
Manual 16 pages 47.36 Kb

GDIZC-P, GDIZC-N specifications

Napoleon Fireplaces has long been recognized as a leader in the fireplace industry, and the GDIZC-N and GDIZC-P models are prime examples of their commitment to innovation and quality. These modern, two-sided gas fireplaces are designed to offer both aesthetic appeal and functional efficiency, making them ideal for a wide range of residential settings.

The GDIZC-N (natural gas) and GDIZC-P (propane) are contemporary gas fireplaces that can be installed in a variety of configurations, including as a room divider or as a standalone feature in a living room or dining area. Their unique design allows for maximum viewing from two sides, creating a stunning focal point that enhances the ambiance of any space. The clean lines and sleek design fit seamlessly into modern architecture while providing warmth and comfort.

One of the standout features of the GDIZC models is their superior heating capabilities. With an impressive heat output of up to 30,000 BTUs, these fireplaces ensure that your home remains cozy during the coldest months. They are equipped with high-efficiency heat exchangers that maximize warmth while minimizing heat loss. This efficiency not only contributes to comfort but also helps in reducing energy costs, making them an economically sound choice for homeowners.

Another notable characteristic of the GDIZC-N and GDIZC-P is the radiant heat technology. This system uses direct heat to warm objects and people in the room, creating an inviting atmosphere. Additionally, the fireplaces are designed with an electronic ignition system, allowing for easy start-up and consistent operation. The inclusion of a built-in safety shut-off feature ensures peace of mind when using these efficient heating units.

Moreover, Napoleon has incorporated contemporary styling options, including customizable media trays and a range of decorative media choices like glass beads and driftwood logs. The advanced LED lighting enhances the realistic flame effect and allows for customizable ambiance, giving users the ability to set the perfect mood for any occasion.

The GDIZC-N and GDIZC-P models are also designed with ease of installation in mind. They come with a versatile venting system, allowing for various venting options to accommodate different home layouts. This flexibility makes it easier for homeowners to integrate these stunning fireplaces into their existing spaces without significant renovations.

In summary, the Napoleon Fireplaces GDIZC-N and GDIZC-P models stand out for their impressive heating capabilities, elegant design, and technological features. With their two-sided viewing, advanced efficiency, and extensive customization options, these fireplaces are a perfect combination of functionality and style for modern living environments. Whether enhancing a cozy living space or serving as a striking room divider, these fireplaces deliver warmth and beauty that any home can benefit from.
Top Page Image Contents