Insert Vent Connection

FIGURE 2

Move the insert close to its final position inside the wood- burning fireplace. This unit is equipped with 6 levelling screws located as follows: two are on either side of the circulation blower on the rear panel; four are located front and back on either side beneath the log support. Level using four of the levelling screws. See Figure 1a. Levelling the unit will eliminate rocking or excessive noise when the fan is in operation. Once the unit is level, move it partially into place within the fireplace to allow for all connections to be made. It is not practical to level the insert once the it has been installed. Determine the required depth prior to in- stalling the unit and adjust the four levelling screws accord- ingly.

CHIMNEY CONNECTION

Chimney installation must conform to both national and local code requirements. The chimney must be lined with one 2" or 3" diameter liner for intake and one 3" diameter liner for exhaust. The minimum and maximum vent lengths are 10 and 35 feet respectively. Recommended Napoleon kits come in 3 lengths: While the liners must be continuous from the fireplace to the terminal, to achieve the needed length, they may be coupled, using an aluminium coupler, provided installation is sealed & secured.

1-2" & 1-3" DOUBLE PLY ALUMINUM LINER-INLET AND EXHAUST &

2-3" TO 2" REDUCER:

GDI-2320KT	VENT KIT 20FT
GDI-2325KT	VENT KIT 25FT
GDI-2335KT	VENT KIT 35FT
2-3" DOUBLE PLY ALUMINUM LINER-INLET AND EXHAUST:
GDI-320KT	VENT KIT 20FT
GDI-325KT	VENT KIT 25 FT
GDI-335KT	VENT KIT 35 FT

We recommend that exhaust vents that pass through unheated spaces, such as a garage or attic, be wrapped in a protective sleeve to minimize condensa- tion and reverse flow symptoms. See Trouble Shooting for details.

This unit is approved for use with a 2" liner for air intake and a 3" liner for exhaust. For best performance, however, it is recommended to use two 3" liners.

If a 2" liner is used for the intake, it is necessary to adjust the primary air shutter. See "Air Shutter Settings" on page 11.

1.OUTSIDE: Slip one end of a liner a minimum of 2" over one of the collars of the terminal. Se- cure using 3 screws. Then seal the joint and screw heads with high tempera- ture sealant. Repeat with the other liner.

NOTE: We recommend that the other end of the exhaust liner be marked to eliminate the exhaust liner being con- nected to the intake collar at the unit.

2.Gently stretch the liners to the required lengths and in- sert into the chimney. Place the terminal onto the top of the chimney cap and fit the flashing plate to suit. Make weather tight by sealing with caulking (not supplied) and fasten to the chimney with screws and plugs (not supplied)

3.INSIDE: Attach and secure the flex liners to the vent connection assembly using the same procedure as be- fore, ensuring that the marked exhaust liner is attached to the exhaust collar.

FIGURE 3

FIGURE 4

4.Detach the two screws from the back of the firebox and remove the panel, as illustrated.

STUDS

VENT CONNECTOR	RESTRICTOR
EXTENSION	PLATE

FIGURE5a-b

5.Reaching in through the insert, manoeuvre the vent con- nection assembly through the openings in the firebox top, taking care not to damage the gasket. In case of a low ceiling fireplace, the extension should be removed and reinstalled after the vent connection is secured to the fire- box. Attach the restrictor plate to the centre stud and se- cure the assembly using the three studs and ¼-20 hex nuts.

W415-0223 / D / 01.12.04

GDIZC-P, GDIZC-N specifications

Napoleon Fireplaces has long been recognized as a leader in the fireplace industry, and the GDIZC-N and GDIZC-P models are prime examples of their commitment to innovation and quality. These modern, two-sided gas fireplaces are designed to offer both aesthetic appeal and functional efficiency, making them ideal for a wide range of residential settings.

The GDIZC-N (natural gas) and GDIZC-P (propane) are contemporary gas fireplaces that can be installed in a variety of configurations, including as a room divider or as a standalone feature in a living room or dining area. Their unique design allows for maximum viewing from two sides, creating a stunning focal point that enhances the ambiance of any space. The clean lines and sleek design fit seamlessly into modern architecture while providing warmth and comfort.

One of the standout features of the GDIZC models is their superior heating capabilities. With an impressive heat output of up to 30,000 BTUs, these fireplaces ensure that your home remains cozy during the coldest months. They are equipped with high-efficiency heat exchangers that maximize warmth while minimizing heat loss. This efficiency not only contributes to comfort but also helps in reducing energy costs, making them an economically sound choice for homeowners.

Another notable characteristic of the GDIZC-N and GDIZC-P is the radiant heat technology. This system uses direct heat to warm objects and people in the room, creating an inviting atmosphere. Additionally, the fireplaces are designed with an electronic ignition system, allowing for easy start-up and consistent operation. The inclusion of a built-in safety shut-off feature ensures peace of mind when using these efficient heating units.

Moreover, Napoleon has incorporated contemporary styling options, including customizable media trays and a range of decorative media choices like glass beads and driftwood logs. The advanced LED lighting enhances the realistic flame effect and allows for customizable ambiance, giving users the ability to set the perfect mood for any occasion.

The GDIZC-N and GDIZC-P models are also designed with ease of installation in mind. They come with a versatile venting system, allowing for various venting options to accommodate different home layouts. This flexibility makes it easier for homeowners to integrate these stunning fireplaces into their existing spaces without significant renovations.

In summary, the Napoleon Fireplaces GDIZC-N and GDIZC-P models stand out for their impressive heating capabilities, elegant design, and technological features. With their two-sided viewing, advanced efficiency, and extensive customization options, these fireplaces are a perfect combination of functionality and style for modern living environments. Whether enhancing a cozy living space or serving as a striking room divider, these fireplaces deliver warmth and beauty that any home can benefit from.