Beckett CF 500/800 instruction manual Wire the burner R8184 alternate, Lockout

Page 11

Instruction Manual – Model CF500/CF800 Oil Burner

Wire the burner — R8184 (alternate)

Install the burner and all wiring in accordance with the National Electrical Code and all applicable local codes or requirements.

Wire the burner in compliance with all instructions provided by the appliance manufacturer. Verify operation of all controls in accordance with the appliance manufacturer's guidelines.

See Figure 9b for an alternate wiring diagram, with R8184 oil primary, for reference purposes only.

Do not by-pass any safety control. By-passing a safety control could result in severe personal injury, death or substantial property damage.

Electrical shock hazard - can cause injury or death. Disconnect power before installing or servicing. Provide ground wiring to the burner in accordance with the National Electrical Code.

Figure 9b – Alternate wiring R8184

Sequence of operation — typical

1.Standby — The burner is idle, waiting for a call for heat.

2.Trial for ignition (TFI) — The fuel valve is opened, as applicable. A flame should be established within the 15- second lockout time (30-second lockout time is avail- able).

3.Lockout — If flame is not sensed by the end of the TFI, the control shuts down on safety lockout and must be manually reset.

•To reset the control after lockout, wait 2 to 3 minutes after lockout to give the internal switch time to cool.

•Then push the reset button on the primary control, allowing the burner to operate in normal sequence.

•Troubleshoot the reason for the flame sense failure.

4.Run — The burner runs until the call for heat is satisfied.

1

Standby

2

Trial for

3

 

Lockout

 

ignition

 

 

4

 

 

 

Run

 

Legend

FD Fused disconnect, by others LM Limit controls, by others

O P Operating controls, by others PR Oil primary control, R8184 typical

CCFlame sensor, cad cell typical

TR Ignition transformer M1 Burner motor

S1 Oil valve

T-T24-volt thermostat/limit terminals F-FCad cell flame sensor terminals

Form 6104 BCF5-R0301

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents ON/OFF Operation CF 800 OilTo the owner To the installerPlease . . . read this page first Hazard definitionsBefore you begin ContentsPre-installation checklist Verify air tube Verify firing rateMount air tube to burner Install nozzleMount the burner Insert burner Set dimension ZOil supply/return lines Connect fuel linesFuel unit by-pass plug Fuel unit gearset capacities Burner fuel flowSequence of operation typical Wire the burner R7184Lockout Wire the burner R8184 alternatePrepare the burner for start-up Starting the burner and venting air Start the burnerMonthly maintenance Maintenance and serviceSet air adjusting plate Annual servicePart name Description Part number Replacement parts

CF 500/800 specifications

The Beckett CF 500/800 is a high-performance oil burner designed for residential and commercial heating applications. This advanced model incorporates cutting-edge technologies and innovative features that enhance energy efficiency, reliability, and ease of use. Engineered for optimal combustion, the CF 500/800 delivers consistent heating with lower emissions, making it an environmentally friendly choice.

One of the standout characteristics of the Beckett CF 500/800 is its unique combustion chamber design. This feature ensures complete fuel combustion, maximizing the energy extracted from the oil while minimizing the release of pollutants. The advanced burner head not only improves efficiency but also reduces noise levels during operation, providing a quieter heating experience.

The CF 500/800 is equipped with an electronic ignition system, which enhances startup reliability. This technology eliminates the need for a constant pilot flame, contributing to energy savings and improved safety. Additionally, the model includes an integrated flame sensor that monitors the combustion process, ensuring that the burner operates optimally.

User-friendly controls make the Beckett CF 500/800 easy to operate and maintain. The burner is designed with accessibility in mind, allowing technicians to service and adjust components without extensive disassembly. Its modular construction further simplifies maintenance, enabling quick repairs and minimizing downtime.

In terms of compatibility, the CF 500/800 can be integrated with various heating systems, including forced hot air, hot water, and steam systems. This versatility makes it suitable for a wide range of applications, from residential homes to larger commercial buildings.

Safety features are paramount in the design of the Beckett CF 500/800. It incorporates a dual technology safety shut-off mechanism, protecting against potential hazards and ensuring peace of mind for users.

In summary, the Beckett CF 500/800 stands out in the competitive oil burner market due to its efficient combustion technology, user-friendly design, and robust safety features. Its ability to provide consistent and reliable heating while prioritizing environmental concerns confirms its position as a leading choice for those seeking a dependable oil burner solution. With the CF 500/800, Beckett continues to deliver quality and innovation in heating technology.
Top Page Image Contents