Sequence of operation typical | Beckett CF 1400 instruction

Instruction Manual – Model CF1400 Oil Burner

Sequence of operation — typical

1.On call for heat from the appliance operating controls (and the circuit from T to T of the R8184 closed), power is applied to the R8184 black wire (BK).

2.The R8184 applies 120 volts to the orange wire (OR), acti- vating the burner motor (M1) and the ignition transformer (TR).

The oil pump is operated by the burner motor, so oil pres- sure is delivered to the oil valve inlet.

3.Power is applied to the oil valve circuit. If optional timer, (TM), is installed, oil flow will be delayed for the timer duration, thus providing a prepurge period.

When the timer times out, the oil valve(s) (S1, and S2 if supplied) is activated, allowing oil to flow to the nozzle.

4.At the start of the cycle, the R8184 begins checking for flame signal between F and F. Flame must be established within 15 seconds of initiation. If no flame is sensed after 15 seconds, the R8184 will terminate all power to the blower and oil circuits, shutting the burner down. The con- trol will electrically lock out.

•To reset the control after lockout, wait 2 to 3 minutes after lockout to give the internal switch time to cool. Then push the reset button on the primary control, al- lowing the burner to operate in normal sequence.

•Troubleshoot the reason for flame sense failure.

5.When the call for heat signal terminates (at the black wire of the R8184), the R8184 terminates power to all circuits, closing the oil valve and stopping the burner motor.

Prepare the burner for start-up

Start-up checklist – Verify the following before attempting to start burner.

❏Combustion air supply and venting have been inspected and verified to be free of obstructions and installed in accordance with all applicable codes.

❏Oil nozzle has been selected correctly and securely installed in the nozzle adapter.

❏Fuel unit by-pass plug has not been installed for one-pipe oil system.

By-pass plug has been installed for two-pipe oil system.

❏Fuel connection to nozzle line assembly is secure.

❏Dimension Z has been set per this instruction manual.

❏Fuel supply line is correctly installed, the oil tank is sufficiently filled, and shut-off valves are open.

❏Burner is securely mounted in appliance, with pressure firing plate and gasket installed for pressurized chamber application.

❏Appliance has been filled with water (boilers) and controls have been operationally checked.

❏Burner has been installed in accordance with appliance manufacturer’s instructions (when available).

❏Also refer to appliance manufacturer’s instructions (when available) for start-up procedures.

Form 6104 BCF14N-R0299

CF 1400 specifications

The Beckett CF 1400 is a cutting-edge heating appliance designed for efficiency, reliability, and versatility in residential and light commercial applications. It stands out in the market due to its robust build, advanced technology, and user-friendly features that cater to diverse heating needs.

One of the primary characteristics of the Beckett CF 1400 is its exceptional fuel efficiency. Utilizing a highly efficient combustion system, this appliance ensures optimal energy use while minimizing emissions. This not only helps in reducing operational costs but also makes it environmentally friendly, aligning with modern sustainability standards.

The CF 1400 incorporates advanced control technology that allows users to easily manage their heating preferences. The intuitive digital interface provides precise temperature control and can be programmed to follow a user's specific schedule, enhancing convenience while promoting energy savings. This smart feature ensures that the home maintains an optimal temperature without unnecessary energy waste, making it an ideal choice for eco-conscious consumers.

Another noteworthy feature is the unit's compact design, allowing it to fit seamlessly into various environments. Its lightweight structure makes installation straightforward, whether in a basement, utility room, or other constrained spaces. The CF 1400 also features a robust construction using high-quality materials, ensuring long-lasting performance and minimal maintenance.

Safety is paramount in heating applications, and the Beckett CF 1400 does not disappoint. It is equipped with multiple safety mechanisms, including a flame sensor and pressure switch, which work together to monitor the combustion process and ensure the unit operates safely under all conditions.

One of the technological highlights of the CF 1400 is its ability to integrate easily with existing heating systems, providing versatility for homeowners looking to upgrade or replace older units. It can efficiently operate with various fuels, including oil and gas, making it adaptable to different preferences and availability.

In conclusion, the Beckett CF 1400 is a state-of-the-art heating solution characterized by its efficiency, smart technology, and safety features. Its combination of fuel versatility and user-friendly controls makes it a standout choice for anyone seeking reliable heating in their home or light commercial space.