Beckett CF 1400 Connect fuel lines, Fuel unit by-pass plug, Oil supply/return lines

Page 8

Instruction Manual – Model CF1400 Oil Burner

Connect fuel line(s)

Install the oil lines using the following guidelines. Failure to comply could lead to equipment damage and present a risk of severe personal injury, death or substantial property damage due to leakage of oil and potential fire hazard.

Use only flare fittings at joints and connections. Never use compression fittings.

Figure 8a – One-pipe oil flow with “H” pump

g

d

c

300 psig

 

 

300 psig

 

b

1410ao

p

 

Install fittings only in accessible locations to assure any leak will be detected.

Where joint sealing is needed, use only pipe dope. Never use Teflon tape. Tape strands can break free and damage the fuel unit.

Never use a one-pipe oil system with a lift in excess of 8 feet with B fuel unit, or 2 feet with H fuel unit. On two-pipe oil systems, verify that the suction line vacuum does not exceed the fuel unit manufacturer’s recommendation.

The fuel unit is shipped without the by-pass plug installed for CF1400 ON/OFF burners. You must install this plug on two-pipe systems. DO NOT install the by-pass plug in the fuel unit if connected to a one-pipe oil system. Failure to comply could cause fuel unit seal failure, oil leakage and potential fire and injury hazard.

Figure 8b – One-pipe oil flow with “B” pump

d

c

300 psig

g

300 psig

 

b

 

 

 

p

 

 

 

 

 

1420ao

 

Legend

 

b Nozzle port

d Nozzle & adapter

c Oil valve(s)

g Inlet port

 

p Air bleed valve

Fuel unit by-pass plug

The CF1400 burner is shipped without the by-pass plug installed in the fuel unit.

The by-pass plug must not be installed in the fuel unit for one-pipe oil systems.

You must install the by-pass plug if using on a two-pipe oil system.

Oil supply/return lines

Install the oil tank and oil lines in accordance with all applicable codes.

Size the oil supply and return lines using the guidelines given in the fuel unit literature included in the literature envelope. Oil line flow rate will equal the burner rate for one-pipe systems. For two-pipe systems, refer to Table 3

8

Form 6104 BCF14N-R0299

Image 8
Contents Model 1400Oil ON/OFF OperationTo the installer Please . . . read this page firstHazard definitions To the ownerContents Before you beginPre-installation checklist Air tube capacity vs. firebox pressure Verify firing rateVerify air tube Install nozzle Install nozzle line assemblyMount the burner Mount flanges on air tubeSet dimension Z Insert burnerOil supply/return lines Connect fuel linesFuel unit by-pass plug Burner fuel flow Fuel unit gearset capacitiesWire the burner Typical wiringSequence of operation typical Prepare the burner for start-upDimension Adjusting plate assembly FigureInitial air settings Figure Initial indicator adjustment plate settings head positionPrepare the fuel unit for air venting Initial air adjusting plate settings damper positionSet appliance limit controls Start the burner Starting the burner and venting airMaintenance and service Set air adjusting plate FigureAnnual service Monthly maintenanceReplacement parts Adjustable mounting plates for CF1400

CF 1400 specifications

The Beckett CF 1400 is a cutting-edge heating appliance designed for efficiency, reliability, and versatility in residential and light commercial applications. It stands out in the market due to its robust build, advanced technology, and user-friendly features that cater to diverse heating needs.

One of the primary characteristics of the Beckett CF 1400 is its exceptional fuel efficiency. Utilizing a highly efficient combustion system, this appliance ensures optimal energy use while minimizing emissions. This not only helps in reducing operational costs but also makes it environmentally friendly, aligning with modern sustainability standards.

The CF 1400 incorporates advanced control technology that allows users to easily manage their heating preferences. The intuitive digital interface provides precise temperature control and can be programmed to follow a user's specific schedule, enhancing convenience while promoting energy savings. This smart feature ensures that the home maintains an optimal temperature without unnecessary energy waste, making it an ideal choice for eco-conscious consumers.

Another noteworthy feature is the unit's compact design, allowing it to fit seamlessly into various environments. Its lightweight structure makes installation straightforward, whether in a basement, utility room, or other constrained spaces. The CF 1400 also features a robust construction using high-quality materials, ensuring long-lasting performance and minimal maintenance.

Safety is paramount in heating applications, and the Beckett CF 1400 does not disappoint. It is equipped with multiple safety mechanisms, including a flame sensor and pressure switch, which work together to monitor the combustion process and ensure the unit operates safely under all conditions.

One of the technological highlights of the CF 1400 is its ability to integrate easily with existing heating systems, providing versatility for homeowners looking to upgrade or replace older units. It can efficiently operate with various fuels, including oil and gas, making it adaptable to different preferences and availability.

In conclusion, the Beckett CF 1400 is a state-of-the-art heating solution characterized by its efficiency, smart technology, and safety features. Its combination of fuel versatility and user-friendly controls makes it a standout choice for anyone seeking reliable heating in their home or light commercial space.