Beckett CF 1400 Please . . . read this page first, Hazard definitions, To the owner

Page 2

Instruction Manual – Model CF1400 Oil Burner

Please . . . read this page first

Hazard definitions

The following will be used throughout this manual to bring attention to hazards and their risk factors, or to special information.

Denotes presence of a hazard which, if ignored, will result in severe personal injury, death or substantial property damage.

Denotes presence of a hazard which, if ignored, could result in minor personal injury or property damage.

Denotes presence of a hazard which, if ignored, could result in severe personal injury, death or substantial property damage.

Intended to bring special attention to information, but not related to personal injury or property damage.

To the owner —

Installation and adjustment of the burner requires technical knowledge and the use of combustion test instruments. Do not tamper with the unit or controls. Call your qualified service technician. Incorrect operation of the burner could result in severe personal injury, death or substantial property damage.

Have your equipment inspected and adjusted at least annually by your qualified service technician to assure continued proper operation.

Never attempt to use gasoline in your heating appliance or to store gasoline or combustible materials near the heating equipment. This could result in an explosion or fire, causing severe personal injury, death or substantial property damage.

To the owner —

Never burn garbage or refuse in your heating appliance or try to light the burner by tossing burning material into the appliance. This could result in severe personal injury, death or substantial property damage.

Never attempt to use crankcase or waste oil in your heating appliance. This could damage the fuel unit or heating equipment, resulting in risk of severe personal injury, death or substantial property damage.

Never restrict air openings on the burner or to the room in which the appliance is located. This could result in fire hazard or flue gas leakage, causing severe personal injury, death or substantial property damage.

To the installer —

To the installer —

Read all instructions before proceeding. Follow all instructions completely. Failure to follow these instructions could result in equipment malfunction, causing severe personal injury, death or substantial property damage.

This equipment must be installed, adjusted and started only by a qualified service technician – an individual or agency, licensed and experienced with all codes and ordinances, who is responsible for the installation and adjustment of the equipment. The installation must comply with all local codes and ordinances and with the National Fire Protection Standard for Oil-Burning Equipment, NFPA 31 (or CSA B139-M91).

Concealed damage - If you discover damage to the burner or controls during unpacking, notify the carrier at once and file the appropriate claim.

Contacting Beckett for service information or parts - Please record the burner serial number (and have available when calling or writing). You will find the serial number on the Underwriters Laboratories label, located on the left rear of the burner.

50 Hz motors — The burner ratings, air settings and nozzle ratings are based on standard 60 hz motors (at 3450 rpm). Derate all ratings 20% when using 50 hz motors. Consult factory for specific application data.

High altitude installations — Accepted industry practice requires no derate of burner capacity up to 2,000 feet above sea level. For altitudes higher than 2,000 feet, derate burner capacity 4% for each 1000 feet above sea level.

2

Form 6104 BCF14N-R0299

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Model 1400Oil ON/OFF OperationHazard definitions To the installerPlease . . . read this page first To the ownerContents Before you beginPre-installation checklist Air tube capacity vs. firebox pressure Verify firing rateVerify air tube Mount the burner Install nozzleInstall nozzle line assembly Mount flanges on air tubeSet dimension Z Insert burnerOil supply/return lines Connect fuel linesFuel unit by-pass plug Burner fuel flow Fuel unit gearset capacitiesWire the burner Typical wiringSequence of operation typical Prepare the burner for start-upInitial air settings Figure DimensionAdjusting plate assembly Figure Initial indicator adjustment plate settings head positionPrepare the fuel unit for air venting Initial air adjusting plate settings damper positionSet appliance limit controls Start the burner Starting the burner and venting airAnnual service Maintenance and serviceSet air adjusting plate Figure Monthly maintenanceReplacement parts Adjustable mounting plates for CF1400

CF 1400 specifications

The Beckett CF 1400 is a cutting-edge heating appliance designed for efficiency, reliability, and versatility in residential and light commercial applications. It stands out in the market due to its robust build, advanced technology, and user-friendly features that cater to diverse heating needs.

One of the primary characteristics of the Beckett CF 1400 is its exceptional fuel efficiency. Utilizing a highly efficient combustion system, this appliance ensures optimal energy use while minimizing emissions. This not only helps in reducing operational costs but also makes it environmentally friendly, aligning with modern sustainability standards.

The CF 1400 incorporates advanced control technology that allows users to easily manage their heating preferences. The intuitive digital interface provides precise temperature control and can be programmed to follow a user's specific schedule, enhancing convenience while promoting energy savings. This smart feature ensures that the home maintains an optimal temperature without unnecessary energy waste, making it an ideal choice for eco-conscious consumers.

Another noteworthy feature is the unit's compact design, allowing it to fit seamlessly into various environments. Its lightweight structure makes installation straightforward, whether in a basement, utility room, or other constrained spaces. The CF 1400 also features a robust construction using high-quality materials, ensuring long-lasting performance and minimal maintenance.

Safety is paramount in heating applications, and the Beckett CF 1400 does not disappoint. It is equipped with multiple safety mechanisms, including a flame sensor and pressure switch, which work together to monitor the combustion process and ensure the unit operates safely under all conditions.

One of the technological highlights of the CF 1400 is its ability to integrate easily with existing heating systems, providing versatility for homeowners looking to upgrade or replace older units. It can efficiently operate with various fuels, including oil and gas, making it adaptable to different preferences and availability.

In conclusion, the Beckett CF 1400 is a state-of-the-art heating solution characterized by its efficiency, smart technology, and safety features. Its combination of fuel versatility and user-friendly controls makes it a standout choice for anyone seeking reliable heating in their home or light commercial space.
Top Page Image Contents