Maintenance and service, Annual service

Instruction Manual – Model CF1400 Oil Burner

❏ Set air adjusting plate (Figure 12)

1.Allow the burner to run until the appliance has warmed sufficiently.

2.Visually check the flame. The flame should not be dark orange or smoky.

If the flame appears to be smoking, increase the amount of air by re-adjusting the damper indicator to a higher number.

3.Once the appliance has warmed, the air setting can be checked and adjusted.

4.Use combustion test instruments to adjust the burner.

a.Adjust the air until a trace of smoke is achieved with

CO2 level as high as possible (lowest possible O2). Example: 13.5% CO2 (2.5% O2) with a trace of smoke.

b.Increase the air to reduce CO2 by 2 percentage points at a zero smoke level. (Increase O2 by 3 percentage points at a zero smoke level.)

Example: Reduce CO2 from 13.5% to 11.5%, with zero smoke (or increase O2 from 2.5% to 5.5%).

c.This procedure provides a margin of reserve air to ac- commodate variable conditions.

5.Check the breech draft pressure against the appliance manufacturer’s recommended setting (typically + 0.1" W.C.).

6.If the breech pressure is higher or lower than recommended level, adjust the appliance breech damper to achieve the

specified setting. Recheck the smoke and CO2 levels. Ad- just burner air if necessary.

Maintenance and service

The burner must be serviced at least annually by a qualified service technician to assure continued reliable operation. Operation and adjustment of the burner requires technical knowledge and the use of combustion test instruments. Do not tamper with the burner or controls. Failure to comply could result in failure of the burner or system, resulting in severe personal injury, death or substantial property damage.

Annual service

— by qualified service technician

Have the burner inspected, tested and started at least annually by a qualified service technician. This annual test/inspection should include at least the following:

❏Inspect combustion air and vent systems.

❏Replace oil filter.

❏Oil motor (if not permanently lubricated).

❏Replace oil nozzle.

❏Clean burner and blower wheel (if needed to remove lint or debris).

❏Test ignition and combustion and verify air damper settings.

❏Test oil supply line vacuum - verify that it is within allowable range indicated in fuel unit literature.

❏Check pump pressure to nozzle.

❏Inspect fuel system (including tank, lines and all connections).

Monthly maintenance

— by owner

❏Observe combustion air openings and vent system for integrity. Openings must be clean and free of obstruc- tions.

❏Check oil lines and fittings to verify there are no leaks.

❏Observe burner ignition and performance to verify smooth operation.

❏Shut the system down if you observe abnormal or ques- tionable operation. Call a qualified service agency for professional inspection and service.

Form 6104 BCF14N-R0299

CF 1400 specifications

The Beckett CF 1400 is a cutting-edge heating appliance designed for efficiency, reliability, and versatility in residential and light commercial applications. It stands out in the market due to its robust build, advanced technology, and user-friendly features that cater to diverse heating needs.

One of the primary characteristics of the Beckett CF 1400 is its exceptional fuel efficiency. Utilizing a highly efficient combustion system, this appliance ensures optimal energy use while minimizing emissions. This not only helps in reducing operational costs but also makes it environmentally friendly, aligning with modern sustainability standards.

The CF 1400 incorporates advanced control technology that allows users to easily manage their heating preferences. The intuitive digital interface provides precise temperature control and can be programmed to follow a user's specific schedule, enhancing convenience while promoting energy savings. This smart feature ensures that the home maintains an optimal temperature without unnecessary energy waste, making it an ideal choice for eco-conscious consumers.

Another noteworthy feature is the unit's compact design, allowing it to fit seamlessly into various environments. Its lightweight structure makes installation straightforward, whether in a basement, utility room, or other constrained spaces. The CF 1400 also features a robust construction using high-quality materials, ensuring long-lasting performance and minimal maintenance.

Safety is paramount in heating applications, and the Beckett CF 1400 does not disappoint. It is equipped with multiple safety mechanisms, including a flame sensor and pressure switch, which work together to monitor the combustion process and ensure the unit operates safely under all conditions.

One of the technological highlights of the CF 1400 is its ability to integrate easily with existing heating systems, providing versatility for homeowners looking to upgrade or replace older units. It can efficiently operate with various fuels, including oil and gas, making it adaptable to different preferences and availability.

In conclusion, the Beckett CF 1400 is a state-of-the-art heating solution characterized by its efficiency, smart technology, and safety features. Its combination of fuel versatility and user-friendly controls makes it a standout choice for anyone seeking reliable heating in their home or light commercial space.