Plumbing

Installation

3 feet (0.9m) above the point at which they exit from the roof, it must also extend 2 feet (0.6m) above the highest point within a 10 ft. (3m) radius.

Do not connect this unit to a chimney flue that is serving another appliance.

NOTE: The restriction of not venting more than one appliance to the same flue applies to the U.S. specifically. In Canada, CSA B365-01 allows it, with specific restrictions. Be sure to contact your building code inspection official to see if this option is allowed in your area, and to find out the specific requirements for such an installation.

FIG.5

Limit connector pipe to 8 ft. or less, with no more than two elbows. All horizontal sections should have 1/4 in. rise per foot. The chimney must be capable of providing a draft reading of at least .06 in. of water column. A barometric damper can be installed to prevent excessive and erratic draft. All connector pipe should be secured with sheet metal screws at each joint.

Notice:

The Aquastat controls supplied with the Trident Boiler are designed only to maintain watertemperaturewithintheboiler.Theactual heating system is controlled separately by your thermostat(s) opening zone valves or energizing circulation pump(s).

Do not attach a thermostat to the supplied controls.

The Harman Trident Boiler can be used as a “Stand Alone” boiler or as an add-on to an existing hot water heating system.

The diagrams in this manual are meant to show the necessary equipment and piping. Your system may look very different. However, if configured properly, the same results will be achieved.

Fig. 6 shows a typical plumbing diagram for tying into an existing system. This method provides water circulation between the two boilers with a circulating pump. In this setup, the domestic water coil in the existing boiler will be heated, making it unnecessary to install a water coil in the Trident Boiler.

Tying-in to an existing boiler must be done in the return line between the circulator and the existing boiler. Run a pipe from there to a small circulator, and then into the 1-1/4 in. fitting on the rear of the Trident Boiler. Next run a pipe from the 1-1/4 in. fitting on the top of the Trident Boiler to a Tee fitting in the supply line of the existing boiler. This Tee fitting must be installed between the existing boiler and the Flow Control Valve, as shown in Fig. 6. An air valve should be installed on this line.

Air Valve

FIG.6

SF160 specifications

The Harman SF160 is a state-of-the-art speaker designed to deliver high-quality audio performance for a variety of applications, including home entertainment, music listening, and professional audio setups. Renowned for its exceptional sound clarity and powerful bass response, the SF160 has quickly gained recognition among audiophiles and sound professionals alike.

One of the standout features of the Harman SF160 is its advanced speaker technology. It employs a finely-tuned woofer and tweeter combination, ensuring that low, mid, and high frequencies are reproduced with precision. This meticulous engineering results in a balanced sound that is pleasing to the ear, making it perfect for listening to anything from classical music to contemporary pop.

The SF160 also boasts a peak power output that can handle demanding audio requirements. With an impressive wattage rating, it can fill large rooms with sound without distortion, providing an immersive listening experience. This makes it an ideal choice for home theaters, parties, or even professional sound setups.

In terms of design, the SF160 is built with durability and aesthetics in mind. The speaker cabinet is crafted from high-quality materials that minimize resonance and coloration of sound while contributing to an elegant look. It comes in various finishes, allowing users to choose a style that complements their home or studio decor.

Connectivity options are another highlight of the SF160. With modern audio demands in mind, it offers a range of input options, including Bluetooth, USB, and auxiliary ports. This versatility enables users to connect a wide array of devices, from smartphones to computers, easily enhancing their listening experience.

Additionally, the Harman SF160 features built-in smart technology, enabling integration with voice assistants and smart home systems. This functionality allows users to control their music effortlessly, making it a convenience-driven audio solution.

Overall, the Harman SF160 synthesizes cutting-edge audio technology with user-friendly design. Its blend of aesthetics, sound performance, and connectivity makes it a standout choice for individuals seeking a top-tier speaker that fits seamlessly into their lifestyle. Whether for casual listening or professional use, the SF160 delivers exceptional audio performance that is hard to beat.