GSA
To locate Lighting Instructions:
Find your boiler model number on boiler nameplate (begins with GSA). Read the valve manufacturer’s model and name on the boiler gas valve. Locate the correct “Lighting Instruction” using the table below. Use only the Instructions applying to your boiler model and gas valve. If you are in doubt which to use, please contact your boiler installer/ technician for assistance.
GSA standing pilot | Boiler models | Page | |
With gas valve: | |||
|
| ||
|
|
| |
Honeywell VR8200 or VR8300 | 4 | ||
|
|
| |
Robertshaw 7200 | 5 | ||
|
|
|
Maintain your boiler using this schedule:
Service technician
(covered in Boiler Manual — for use only by a qualified service technician)
| ❏ | Inspect: | ||
|
| • Reported problems | ||
|
| • | Boiler area | |
|
| • | Air openings | |
|
| • Flue gas vent system | ||
|
| • | Pilot and main burner flames | |
UP |
| • | Piping | |
| • | Boiler heating surfaces | ||
|
| |||
START- |
| • Burners and base | ||
❏ | Service: | |||
| ||||
ANNNUAL |
| • Gauge glass | ||
❏ | ||||
| ||||
|
| • | Perform | |
| ❏ | Check/test: | ||
|
| • | Gas piping | |
|
| • | Boiler waterline | |
|
| • | Limit controls and cutoffs | |
|
| • | Boiler relief valve | |
| ❏ | Review: | ||
|
| • Review with owner | ||
|
|
|
|
| Owner maintenance |
| (see pages 6 – 8 for instructions) |
|
|
❏ Daily | • Check boiler area |
| • Check boiler pressure gauge |
| • Check air openings |
❏ Monthly | • Check boiler and system piping |
•Check venting system
•Check/operate boiler relief valve
•Check pilot and main burner flames
❏Periodically • Test low water cutoff
❏End of season • Shut down procedure
Part Number | 3 |