Electrolux 583394, 583395 manual Altering the cooking programmes while working, Mechanical Tilting

OPERATING INSTRUCTIONS

the cooking time appears on the display (AD).

•The program-linked cooking process is switched off by pressing the HACCP button (C). The appliance is then switched off according to 5.5.

A separate set of operating instructions contains information on the programming, analysing, logging and documenting of cooking processes using an external computer.

4.7Altering the pan settings

Altering the nominal values while working

All the nominal values programmed in originally can be easily altered during the working process by setting the buttons for temperature (T), for the cooking time (D) and for the starting time (Z) to the new values. When the buttons are turned, the nominal value will appear flashing on the relevant display. If the nominal value is not altered for a few seconds, the display reverts to the actual value.

Altering the cooking programmes while working

Switching off the button (TT) will interrupt the heating/cooking process. Switching off the cooking time button (DT) reverts to continuous cooking. Switching off the starting time button (ZT) deletes the programmed-in starting time. The appliance can be started manually.

4.8Tilting

MECHANICAL TILTING

The boiling pan is tilted with the help of an electric motor. It only works when the power isolator (H) (only available as an option) and the control switch (S) are switched on by turning from position 0 to I.

Lamp (LS) will light up.

Tilting at variable speed by turning the tilting knob (K): Emptying the pan turn to the right

Tilting back turn to the left

Turning the knob further will accelerate the tilting function.

.

K Tilting knob

4.9Switching off

The appliance is shut down by turning the power isolator (H) (available as an option) as well as the control switch (S) to zero. All lights will go out when this is done.

In the case of faults, the appliance must also be disconnected from all supply connections (mains supply, gas)

4.10Power failure

The loss of mains electricity while a cooking pan is being used can result in cooking being halted or interrupted. Cooking staff are then required to make an additional intervention in the con- trols or to monitor further processing.

		The measure to be imple-
Power failure when:		mented to restart the cooking
		process after the mains sup-
		ply has been restored
The cooking process is taking Press the key (TT)
place
The	cooking process	After the mains supply has
		has been restored,	the starting
been	programmed with	a time comes to an end and the
starting time although this has heating process			starts auto-
not yet expired		matically without any interven-
		tion in the controls

Fig. 6 Left-hand console (at the top)

Tilting is only to be activated with lid fully open and with the swivel outlet of the water mixing unit in the correct position (precisely towards the front) and where no object is present under the appliance in the tilting zone. The boiling pan is tilted down by turning tilting switch clockwise (to the right) and tilted up by turning it anticlockwise (to the left). Tilting at variable speed will only take place as long as the tilting switch (K) is held in the tilting position. On being released, the switch returns to the neutral, centre position and due to the drive self- locking, the boiling pan immediately comes to rest, whatever the position and filling level. The tilting motor is automatically switched off in the extreme positions of the boiling pan; the horizontal and fully tilted positions, so any further actuation of the tilting switch (K) has no effect.

The heating can no longer be operated with even the smallest degree of tilt from the horizontal.

Select the rate of tilting so that the produce is discharged in the region of the pouring lip. This is easy to do by varying the tilting speed. Avoid spillage of the contents over the rim of the boiling pan.

62.9693.01 Page 8