Hot Surfaces, Blower/Electrical Hazard, Location

Hot Surfaces

The Allagash gas stove will, during normal operation, reach high surface temperatures therefore:

·Due to the high operating temperatures this appliance should be located out of traffic and away from furniture and draperies.

·Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition.

·Young children should be supervised while they are in the same room as the Allagash gas stove.

·Clothing or other flammable materials should not be placed ON or NEAR the Allagash gas stove.

·Surveiller les enfants. Garder les vetements, les meubles, l’essence ou autres liquides a vapeur inflammables loin de l’appareil.

·NEVER store or use gasoline or any other flammable vapors or liquids in the vicinity of the Allagash gas stove.

·Never burn any other materials in your Allagash gas stove, it is strictly designed for use with natural gas or propane fuel ONLY.

·Any safety screen, glass or guard removed for servicing the appliance must be replaced prior to operating the appliance.

Blower/Electrical Hazard

When the Allagash gas stove is installed with the optional forced air Blower Kit (part #129161) the stove must be electrically grounded in accordance with local codes or, in the absence of local codes, with the current NFPA 70- National Electrical Code or CSA C22.1-Canadian Code.

The Allagash Blower Kit is already supplied with

athree-prong (grounding) plug for protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle.

DO NOT CUT OR REMOVE THE GROUNDING PRONG FROM THE PLUG. Always unplug the Blower when performing routine service to the Allagash gas stove.

THIS APPLIANCE MUST NOT BE CONNECTED TO A CHIMNEY OR FLUE SERVING ANY OTHER APPLIANCE OF ANY KIND.

LOCATION:

In selecting the location, the aesthetic and functional use of the appliance are primary concerns; However, proper venting systems and access to the fuel supply are also important issues. Due to the high surface temperatures of the Allagash, always consider the proximity of traffic ways, furniture, draperies, etc.

This appliance may be located on or near conventional construction materials. HOWEVER, always maintain the proper clearances to combustibles, as this provides adequate ventilation air around the appliance.

The following clearances and hearth requirements are the minimum requirements when installing the Allagash gas stove near or on combustible surfaces. Always provide adequate access around the appliance for servicing and proper operation.

A combustible surface is anything that can burn (i.e. sheet rock, wall paper, wood, fabrics etc.). These surfaces are not limited to those that are visible and also include materials that are behind non-combustibles.

If you are not sure of the combustible nature of a material, consult your local fire officials. Remember, “Fire Resistant” materials are considered combustible: they are difficult to ignite, but will burn. Also, “fire-rated” sheet rock is considered combustible.

The Allagsh B-Vent gas stove is not to be connected or installed using any warm air duct system.

Always maintain the proper clearances to the appliance for the proper flow of combustion and ventilation air to the stove.

GF 3 BV specifications

The Jotul GF 3 BV is a gas-burning fireplace that combines classic design with modern technology, making it a popular choice for homeowners seeking both style and efficiency. This model is part of the renowned Jotul family, known for their high-quality craftsmanship and lasting durability.

One of the standout features of the Jotul GF 3 BV is its impressive heat output. With an efficiency rating that rivals many wood-burning stoves, this gas fireplace can easily warm up larger spaces, making it ideal for living rooms, family areas, or open floor plans. The unit delivers a maximum input of 20,000 BTUs, allowing it to provide substantial warmth without the hassle of traditional wood fires.

The design of the Jotul GF 3 BV reflects a timeless aesthetic that can suit various interior styles. It features a beautiful cast iron construction, which not only contributes to its durability but also adds a classic touch to the ambiance of any room. The unit is available in multiple finishes, including natural gas and propane, allowing homeowners to choose the best option that fits their existing decor and preferences.

In terms of technology, the Jotul GF 3 BV includes an innovative venting system that allows for flexible installation options. This system is designed to minimize the need for extensive chimney work, making the unit easier to install in various settings. Additionally, the fireplace is equipped with a ceramic glass window that provides an unobstructed view of the flames while maintaining the efficiency of the fire.

Another significant characteristic of the Jotul GF 3 BV is its intuitive control system. This allows users to easily adjust the flame height and heat output, providing customizable comfort levels at the touch of a button. The fireplace can also be integrated with remote control options for added convenience, showing Jotul's commitment to modernizing traditional fireplace experiences.

Overall, the Jotul GF 3 BV is an excellent choice for those looking for an efficient, stylish, and easy-to-use gas fireplace. With its combination of classic design, high efficiency, and user-friendly features, it represents a perfect blend of form and function for contemporary living spaces. Whether you are renovating your home or simply seeking an efficient heating solution, the Jotul GF 3 BV delivers on all fronts.