Jotul GF 3 BV manual Installing the LOG SET

Page 15

To adjust the air shutter

1.Remove the burner tube and using a phillips head screwdriver loosen the screw at the air shutter and adjust accordingly.

2.Be sure to retighten the screw that holds the air shutter setting.

3.Reassemble the stove and close the door, allow stove to burn 30 minutes on the HIGH setting, observing the flame continuously.

4.If the flame appears weak, slow, or sooty, repeat the process described above until the flame is as desired.

Figure 8

WARNING:

AIR SHUTTER ADJUSTMENTS

SHOULD ONLY BE PERFORMED BY A QUALIFIED PROFESSIONAL SERVICE TECHNICIAN.

INSTALLING THE LOG SET:

The Allagash is equipped with a one piece log set and is packaged in bubble wrap inside the firebox. The log set must be removed from the packaging and arranged in the unit prior to start up of the gas stove. Do not handle the log set with your bare hands. Always wear gloves to prevent skin irritation from the ceramic fibers.

To install the log set, remove the packaging and place the log set inside the firebox, centered from left to right and completely against the rear wall of the stove. See Figure 8.

Embers: the stove is shipped with a package of glowing embers. These embers should be “pea size” and individually spaced across the burner tube screen. It is best to equally space these embers for optimum flame appearance. NOTE:

YOU DO NOT HAVE TO USE ALL OF THE EMBERS.

THE CERAMIC FIBER LOGS AND GLOWING EMBERS CAN IRRITATE YOUR SKIN. IF THIS HAPPENS, GENTLY WASH HANDS WITH WARM SOAPY WATER.

INSTALLING DECORATIVE PIPE BRACKETS: (The use of decorative pipe is optional and not included with the Allagash B- Vent stove.)

To install the decorative pipe brackets on the Allagash simply remove the four 1/4” hex head screws holding the 4” flue collar on the stove. See Figure 9.

It is not neccessary to remove the flue collar. Place the “L” shaped decorative pipe brackets on the flue collar and align the holes on the brackets, flue collar, and draft hood and secure all three with the four 1/4” hex head screws.

Black or enamel stove pipe can now rest on the the draft hood of the appliance while the brackets center the stove pipe over the draft hood.

Reminder: single wall stove pipe can never be used as the vent pipe on the Allagash B-Vent stove.

Figure 9

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Warnock Hersey GF 3 BV AllagashModel Allagash B-Vent Gas Stove Table of ContentsInput Rates Welcome to JøtulDo not Operate this Stove if ANY Part has Been Under Water StandardsHot Surfaces Blower/Electrical HazardLocation Corner clearance =376mm Floor ProtectionStove Clearances Rear clearance =250mmVenting Requirements Firestop is required at every floor Venting Configurations for GAS Conversion Tools requiredIncluded in the conversion kit Remove the regulator tower and the gasket GAS Pressure Making the GAS ConnectionNecessary Manifold Pressures High Altitude InstallationsNecessary Inlet GAS Pressures Inches water columnGAS Type Orifice Elevation Jøtul Size AIR Shutter ADJUSTMENT/FLAME AppearanceInstalling the LOG SET Reminder Installing the Optional BlowerSpill Switch Installing the Optional Wall Thermostat or RemoteChecking the System Operation of Appliance MaintenanceService LOG Allagash B-VENT Parts List GF3 BV Allagash Illustrated Parts Breakdown Lighting Instructions Jøtul ASA

GF 3 BV specifications

The Jotul GF 3 BV is a gas-burning fireplace that combines classic design with modern technology, making it a popular choice for homeowners seeking both style and efficiency. This model is part of the renowned Jotul family, known for their high-quality craftsmanship and lasting durability.

One of the standout features of the Jotul GF 3 BV is its impressive heat output. With an efficiency rating that rivals many wood-burning stoves, this gas fireplace can easily warm up larger spaces, making it ideal for living rooms, family areas, or open floor plans. The unit delivers a maximum input of 20,000 BTUs, allowing it to provide substantial warmth without the hassle of traditional wood fires.

The design of the Jotul GF 3 BV reflects a timeless aesthetic that can suit various interior styles. It features a beautiful cast iron construction, which not only contributes to its durability but also adds a classic touch to the ambiance of any room. The unit is available in multiple finishes, including natural gas and propane, allowing homeowners to choose the best option that fits their existing decor and preferences.

In terms of technology, the Jotul GF 3 BV includes an innovative venting system that allows for flexible installation options. This system is designed to minimize the need for extensive chimney work, making the unit easier to install in various settings. Additionally, the fireplace is equipped with a ceramic glass window that provides an unobstructed view of the flames while maintaining the efficiency of the fire.

Another significant characteristic of the Jotul GF 3 BV is its intuitive control system. This allows users to easily adjust the flame height and heat output, providing customizable comfort levels at the touch of a button. The fireplace can also be integrated with remote control options for added convenience, showing Jotul's commitment to modernizing traditional fireplace experiences.

Overall, the Jotul GF 3 BV is an excellent choice for those looking for an efficient, stylish, and easy-to-use gas fireplace. With its combination of classic design, high efficiency, and user-friendly features, it represents a perfect blend of form and function for contemporary living spaces. Whether you are renovating your home or simply seeking an efficient heating solution, the Jotul GF 3 BV delivers on all fronts.
Top Page Image Contents