Kidde PI9000CA manual Maintenance, Alarm Removal

Page 14

Operation

Testing

Test by pushing the Test button on the cover and hold it down for a minimum of 5 seconds. This will sound the alarm if all the electronic circuitry, horn and battery are working. If no alarm sounds, the unit has defective batteries or other failure. DO NOT use an open flame to test your alarm, you could damage the alarm or ignite combustible materials and start a structure fire.

Test the alarm weekly to ensure proper operation. Erratic or low sound coming from your alarm may indicate a defective alarm, and it should be returned to place of purchase (see Warranty section).

NOTE: WEEKLY TESTING IS REQUIRED!

Maintenance

Alarm Removal

If the smoke alarm tamper resist feature has been activated, refer to the alarm tamper-resist feature section for removal instructions. To remove the alarm from the mounting plate, rotate the alarm in the direction of the "OFF" arrow on the cover.

Battery Replacement

This smoke alarm uses a 9 V alkaline battery (a lithium battery may also be used). A fresh alkaline battery should last for one year under normal operating conditions. This alarm has a low battery monitor circuit which will cause the alarm to “chirp” approximately every 30 seconds for a minimum of 7 days when the battery loses power. Replace when this condition occurs. Continued “chirping” after the battery replacement may indicate defective circuitry, and the alarm should be returned to place of purchase.

Use only the following 9 V batteries for replacement:

Alkaline Type

Energizer 522

 

Duracell MN1604 or MX1604

 

Gold Peak 1604A

 

Panasonic 6AM6, 6AM-6, 6AM-6PI,

 

6AM6X, and 6LR61(GA)

Lithium Type

Ultralife U9VL-J

13

Image 14
Contents Dual Sensor Contents IntroductionInstallation Recommended Locations Image 1A Image 1B Locations to Avoid Ceilingminimum Mobile Homes MountingRemove Operation BatteryTesting Hush Control Feature Alarm Tamper-Resist Feature LED Indicators Smoke Sensing Chamber OperationMaintenance Alarm RemovalCleaning the Alarm Fire Safety Limitations of Smoke AlarmsGood Safety Habits What To Do When The Alarm Sounds NRC InformationAdditional Recommendations Warranty Year Limited Warranty

PI9000CA specifications

The Kidde PI9000CA is a highly advanced smoke and carbon monoxide detector designed for residential safety. Combining cutting-edge technology with user-friendly features, this device offers comprehensive protection against the dual threats of smoke and lethal carbon monoxide gas.

One of the standout features of the Kidde PI9000CA is its dual-sensor technology. It employs both photoelectric and ionization sensing technologies, allowing it to detect a wide range of fire types. Photoelectric sensors are particularly effective for smoldering fires, which produce more smoke and less flame, while ionization sensors are better at detecting fast-flaming fires. This dual approach significantly enhances the unit's overall detection capabilities, ensuring quicker alerts and potentially saving lives.

Additionally, the PI9000CA is equipped with a voice alarm feature that clearly announces the type of danger detected. This intuitive feature helps occupants quickly identify whether there is smoke or carbon monoxide in the environment, allowing for a faster and more informed response. Audible alarms are accompanied by a loud 85-decibel alert, ensuring that the warnings can be heard throughout the home.

Another notable characteristic of the Kidde PI9000CA is its battery backup system. While it can be hardwired into the household electrical system, it also includes a battery backup to ensure continued operation during power outages. This is critical for maintaining safety in unexpected situations.

The design of the Kidde PI9000CA is also user-friendly. It features a sleek and modern look that seamlessly integrates into home décor. The easy-to-read display shows battery status and alert conditions, simplifying maintenance and monitoring for homeowners.

Installation is another area where the Kidde PI9000CA excels. The unit is designed for quick and straightforward installation, making it accessible for homeowners without extensive DIY experience. Furthermore, it meets all relevant safety standards and certifications, making it a trusted choice among safety-conscious users.

The Kidde PI9000CA also features a test/reset button, allowing users to regularly check the functionality of the detector. Regular testing is crucial for ensuring that the device operates correctly, keeping families safe from the risks associated with smoke and carbon monoxide exposure.

In summary, the Kidde PI9000CA is a robust smoke and carbon monoxide detector integrating advanced dual-sensor technology, a clear voice alarm, battery backup, and easy installation. Its user-friendly design and reliable performance make it an essential part of any home safety plan, guaranteeing that families are protected around the clock.