Kidde PI9000CA manual Fire Safety, Limitations of Smoke Alarms

Page 16

Fire Safety

Limitations of Smoke Alarms

WARNING: Please read carefully and thoroughly.

•NFPA 72 states: Life safety from fire in residential occupancies is based primarily on early notification to occupants of the need to escape, followed by the appropriate egress actions by those occupants. Fire warning systems for dwelling units are capable of protecting about half of the occupants in potentially fatal fires. Victims are often intimate with the fire, too old or young, or physically or mentally impaired such that they cannot escape even when warned early enough that escape should be possible. For these people, other strategies such as protection-in-place or assisted escape or rescue are necessary.

•Smoke alarms are devices that can provide early warning of possible fires at a reasonable cost; however, alarms have sensing limitations. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow, smouldering fires) sooner than ionization alarms. Home fires develop in different ways and are often unpredictable. For maximum protection, Kidde recommends that both ionization and photoelectric alarms be installed.

•A battery powered alarm must have a battery of the specified type, in good condition and installed properly.

•A.C. powered alarms (without battery backup) will not operate if the A.C. power has been cut off, such as by an electrical fire or an open fuse.

•Smoke alarms must be tested regularly to make sure the batteries and the alarm circuits are in good operating condition.

•Smoke alarms cannot provide an alarm if smoke does not reach the alarm. Therefore, smoke alarms may not sense fires starting in chimneys, walls, on roofs, on the other side of a closed door or on a different floor.

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Dual Sensor Contents IntroductionInstallation Recommended Locations Image 1A Image 1B Locations to Avoid Ceilingminimum Mobile Homes MountingRemove Testing BatteryOperation Hush Control Feature Alarm Tamper-Resist Feature LED Indicators Smoke Sensing Chamber OperationMaintenance Alarm RemovalCleaning the Alarm Fire Safety Limitations of Smoke AlarmsGood Safety Habits What To Do When The Alarm Sounds NRC InformationAdditional Recommendations Warranty Year Limited Warranty

PI9000CA specifications

The Kidde PI9000CA is a highly advanced smoke and carbon monoxide detector designed for residential safety. Combining cutting-edge technology with user-friendly features, this device offers comprehensive protection against the dual threats of smoke and lethal carbon monoxide gas.

One of the standout features of the Kidde PI9000CA is its dual-sensor technology. It employs both photoelectric and ionization sensing technologies, allowing it to detect a wide range of fire types. Photoelectric sensors are particularly effective for smoldering fires, which produce more smoke and less flame, while ionization sensors are better at detecting fast-flaming fires. This dual approach significantly enhances the unit's overall detection capabilities, ensuring quicker alerts and potentially saving lives.

Additionally, the PI9000CA is equipped with a voice alarm feature that clearly announces the type of danger detected. This intuitive feature helps occupants quickly identify whether there is smoke or carbon monoxide in the environment, allowing for a faster and more informed response. Audible alarms are accompanied by a loud 85-decibel alert, ensuring that the warnings can be heard throughout the home.

Another notable characteristic of the Kidde PI9000CA is its battery backup system. While it can be hardwired into the household electrical system, it also includes a battery backup to ensure continued operation during power outages. This is critical for maintaining safety in unexpected situations.

The design of the Kidde PI9000CA is also user-friendly. It features a sleek and modern look that seamlessly integrates into home décor. The easy-to-read display shows battery status and alert conditions, simplifying maintenance and monitoring for homeowners.

Installation is another area where the Kidde PI9000CA excels. The unit is designed for quick and straightforward installation, making it accessible for homeowners without extensive DIY experience. Furthermore, it meets all relevant safety standards and certifications, making it a trusted choice among safety-conscious users.

The Kidde PI9000CA also features a test/reset button, allowing users to regularly check the functionality of the detector. Regular testing is crucial for ensuring that the device operates correctly, keeping families safe from the risks associated with smoke and carbon monoxide exposure.

In summary, the Kidde PI9000CA is a robust smoke and carbon monoxide detector integrating advanced dual-sensor technology, a clear voice alarm, battery backup, and easy installation. Its user-friendly design and reliable performance make it an essential part of any home safety plan, guaranteeing that families are protected around the clock.
Top Page Image Contents