Kidde PI9000CA manual Locations to Avoid

Page 6

Installation

Locations to Avoid

•Do not install within 0.9 m (3') of the following: The door to a kitchen, or a bathroom that contains a tub or shower, forced air supply ducts used for heating or cooling, ceiling or whole house ventilating fans, or other high, air-flow areas.

•Do not place the alarm where drapes or other objects will block the sensor. Smoke must be able to reach the sensor to accurately detect conditions.

•Do not install in peaks of vaulted ceilings, “A” frame ceilings or gabled roofs. (Less than 10 cm (4") from the peak of an “A” frame type ceiling.)

•Install at least 30.5 cm (12") away from fluorescent lights as electronic noise may cause nuisance alarms.

•Keep out of insect infested areas. Avoid excessively dusty, dirty or greasy areas. Dust particles may cause nuisance alarms or failure to alarm.

•Extreme temperatures may effect the sensitivity of the alarm. Do not install in areas where the temperature is colder than 4.4°C (40°F) or hotter than 37.8°C (100°F), such as garages or unfinished attics.

•Do not install in areas where the relative humidity (RH) is greater than 85%. Very humid areas, with moisture or steam, can cause nuisance alarms.

•Avoid placing ionization smoke alarms in kitchen areas. Normal cooking may cause nuisance alarms. If a kitchen alarm is desired, it should have a Hush® feature or be a photoelectric type.

•Do not place in the garage. Particles of combustion are present when you start your automobile.

•Smoke alarms are not to be used with detector guards unless the combination (alarm and guard) has been evaluated and found suitable for that purpose.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Dual Sensor Contents IntroductionInstallation Recommended Locations Image 1A Image 1B Locations to Avoid Ceilingminimum Mobile Homes MountingRemove Battery TestingOperation Hush Control Feature Alarm Tamper-Resist Feature LED Indicators Smoke Sensing Chamber OperationMaintenance Alarm RemovalCleaning the Alarm Fire Safety Limitations of Smoke AlarmsGood Safety Habits What To Do When The Alarm Sounds NRC InformationAdditional Recommendations Warranty Year Limited Warranty

PI9000CA specifications

The Kidde PI9000CA is a highly advanced smoke and carbon monoxide detector designed for residential safety. Combining cutting-edge technology with user-friendly features, this device offers comprehensive protection against the dual threats of smoke and lethal carbon monoxide gas.

One of the standout features of the Kidde PI9000CA is its dual-sensor technology. It employs both photoelectric and ionization sensing technologies, allowing it to detect a wide range of fire types. Photoelectric sensors are particularly effective for smoldering fires, which produce more smoke and less flame, while ionization sensors are better at detecting fast-flaming fires. This dual approach significantly enhances the unit's overall detection capabilities, ensuring quicker alerts and potentially saving lives.

Additionally, the PI9000CA is equipped with a voice alarm feature that clearly announces the type of danger detected. This intuitive feature helps occupants quickly identify whether there is smoke or carbon monoxide in the environment, allowing for a faster and more informed response. Audible alarms are accompanied by a loud 85-decibel alert, ensuring that the warnings can be heard throughout the home.

Another notable characteristic of the Kidde PI9000CA is its battery backup system. While it can be hardwired into the household electrical system, it also includes a battery backup to ensure continued operation during power outages. This is critical for maintaining safety in unexpected situations.

The design of the Kidde PI9000CA is also user-friendly. It features a sleek and modern look that seamlessly integrates into home décor. The easy-to-read display shows battery status and alert conditions, simplifying maintenance and monitoring for homeowners.

Installation is another area where the Kidde PI9000CA excels. The unit is designed for quick and straightforward installation, making it accessible for homeowners without extensive DIY experience. Furthermore, it meets all relevant safety standards and certifications, making it a trusted choice among safety-conscious users.

The Kidde PI9000CA also features a test/reset button, allowing users to regularly check the functionality of the detector. Regular testing is crucial for ensuring that the device operates correctly, keeping families safe from the risks associated with smoke and carbon monoxide exposure.

In summary, the Kidde PI9000CA is a robust smoke and carbon monoxide detector integrating advanced dual-sensor technology, a clear voice alarm, battery backup, and easy installation. Its user-friendly design and reliable performance make it an essential part of any home safety plan, guaranteeing that families are protected around the clock.
Top Page Image Contents