Firex FADC manual Smoke Alarm Placement

Page 2

The Push-to-Test button accurately tests all smoke alarm functions. DO NOT use any other test method. Test smoke alarm weekly to ensure proper operation.

Smoke alarms must not be used with detector guards unless the combination of alarm and guard has been evaluated and found suitable for that purpose.

This smoke alarm should be installed only by a licensed, qualified electrician. Observe and follow all local and national electrical and building codes for installation.

This smoke alarm IS NOT designed to be the PRIMARY protection for buildings that require complete fire alarm systems. Buildings of this type include hotels, motels, dormito- ries, hospitals, nursing homes, and group homes. This is true even if they were once single family homes. However, this smoke alarm MAY be used inside individual rooms as SUPPLEMENTAL protection.

Install a smoke alarm in every room and on every level of the home. Smoke may not reach the smoke alarm for many reasons. For example, if a fire starts in a remote part of the home, on another level, in a chimney, wall, roof, or on the other side of a closed door, smoke may not reach the smoke alarm in time to alert household members. A smoke alarm will not promptly detect a fire EXCEPT in the area or room in which it is installed.

Interconnected smoke alarms installed in every room and on every level of the household offer maximum protection. The National Fire Protection Agency (NFPA) recommends interconnecting smoke alarms so that when one smoke alarm senses smoke and sounds its alarm, all others will sound as well. Do not interconnect smoke alarms from one individual family living unit to another. Do not connect this smoke alarm to any other type of alarm or auxiliary device.

Smoke alarms may not alert every household member every time. There may be limiting circumstances where a household member may not hear the alarm (e.g., outdoor or indoor noise, sound sleepers, drug or alcohol usage, the hard of hearing, etc.). If you suspect that this smoke alarm may not alert a household member, install and maintain specialty smoke alarms. Current studies have shown smoke alarms may not awaken all sleeping individuals, and that it is the responsibility of individuals in the household that are capable of assisting oth- ers to provide assistance to those who may not be awakened by the alarm sound, or to those who may be incapable of safely evacuating the area unassisted.

Smoke alarms can only sound their alarms when they detect smoke. Smoke alarms detect combustion particles in the air. They do not sense heat, flame, or gas. This smoke alarm is designed to give audible warning of a developing fire. However, many fires are fast-burning, explosive, or intentional. Others are caused by carelessness or safety hazards. Smoke may not reach the smoke alarm QUICKLY ENOUGH to ensure safe escape.

Smoke alarms have limitations. This smoke alarm is not fool- proof and is not warranted to protect lives or property from fire. Smoke alarms are not a substitute for insurance. Homeowners and renters should insure their lives and property. In addition, it is possible for the smoke alarm to fail at any time. For this reason, you must test the smoke alarm weekly and replace every 10 years.

SMOKE ALARM PLACEMENT

Invensys Controls Americas recommends complete coverage pro- tection achieved by installing a smoke alarm in every room of your home. The National Fire Protection Association’s (NFPA) minimum requirement, as stated in Standard 72, Chapter 2, reads as follows:

“2-2.1.1.1 Smoke detectors shall be installed outside of each sepa- rate sleeping area in the immediate vicinity of the bedrooms and on each additional story of the family living unit including basements and excluding crawl spaces and unfinished attics. In new construc- tion a smoke detector also shall be installed in each sleeping room.”

Chapter 2 also reads as follows:

“2-2.2.1 In new construction, where more than one smoke detector is required by 2-2.1, they shall be so arranged that operation of any smoke detector shall cause the alarm in all smoke detectors within the dwelling to sound.”

The NFPA, 1993 Edition, Appendix A further states:

“The required number of smoke detectors may not provide reliable early warning protection for those areas separated by a door from the areas protected by the required smoke detectors. For this reason, it is recommended that the householder consider the use of additional smoke detectors for those areas for

DINING

KITCHEN

BEDROOM BEDROOM

ROOM

 

 

LIVING ROOM

 

BEDROOM

BEDROOM HALL BEDROOM

LIVING

DINING

ROOM

ROOM

BASEMENT

 

2

Image 2
Contents Photoelectric Model PAD Smoke Alarm FeaturesIONIZATION110-628F R N I N GSmoke Alarm Placement Important Smoke Alarm Placement and Exception Information KeyHOW to Install This Smoke Alarm Do not install smoke alarmsRED and Green LED Indicators False Alarm ControlInterconnecting Smoke Alarms Battery Replacement Testing the Smoke AlarmMaintenance and Cleaning Test all smoke alarms weekly by doing the followingDoing so will void your warranty CleaningPractice Fire Safety RepairTroubleshooting Warranty Information

FADC specifications

Firex FADC, or Fire Detection and Control Systems, is a cutting-edge solution designed to enhance fire safety in various environments, from industrial facilities to residential buildings. The primary objective of Firex FADC is to provide comprehensive fire detection, monitoring, and response capabilities, ensuring the protection of lives and property.

One of the standout features of Firex FADC is its advanced smoke detection technology. Incorporating both photoelectric and ionization sensors, this system can quickly identify different types of fires, including slow-burning or fast-flame ones. The dual-sensor approach ensures a higher rate of detection while minimizing false alarms, a common challenge in traditional fire detection systems.

Another critical aspect of Firex FADC is its integration with smart building technologies. Utilizing the Internet of Things (IoT), the system can interface with building management systems, allowing for real-time monitoring and remote management. This integration facilitates rapid response times and enhances situational awareness during emergencies. Additionally, the Firex FADC can send alerts to designated personnel and emergency services, streamlining the communication process during a fire incident.

Firex FADC also boasts an intuitive user interface designed for ease of use. The system provides clear visual notifications and audible alerts, ensuring that occupants are promptly informed of any potential dangers. Furthermore, the system is equipped with a self-testing feature, enabling regular checks to verify operational readiness without manual intervention.

The installation of Firex FADC is user-friendly, allowing for seamless incorporation into both new and existing structures. Its modular design allows for scalability, meaning that additional sensors and modules can be added as needed to meet evolving safety requirements.

Firex FADC stands out with its robust data analytics capabilities. By utilizing machine learning algorithms, the system can analyze historical data and patterns, enabling predictive maintenance and trend analysis. This proactive approach not only enhances the efficacy of fire detection but also helps in reducing operational costs by minimizing downtime and maintenance needs.

In summary, Firex FADC represents a significant advancement in fire safety technology. By combining sophisticated detection capabilities, smart integration, user-friendly interfaces, and data analytics, it empowers organizations and homeowners alike to better protect their lives and properties from the threat of fire. This innovative approach makes Firex FADC a vital tool in the ongoing fight against fire hazards.