Kidde 2SF23/9HIRE, 3SF23/9HIRE, 1SF23/9HIRE owner manual PP3, Battery type/code nos

Page 5

ii. Slide scewdriver blade in recess to unlock from base.

iii. Unclip and slide alarm as illustrated.

iv.Note correct position of battery and install replacement type as listed below. The alarm cannot be replaced without a battery installed.

- +

v

PP3

Reverse procedure to re-install alarm.

We recommend the use of alkaline for a longer service life.

Battery type/code nos.

Alkaline type: Eveready 522; Duracell MN1604; Duracell Ultra MX1604;

*On rechargeable models there are no user serviceable

batteries to be changed. (See Section 6.)

vi.When you have fitted a fresh battery, check test button; if horn sounds then reverse the process above, reconnect to the mains and switch circuit back on at Consumer Unit.

If in any doubt, consult a qualified electrician as mains electricity can be hazardous.

5

Image 5
Contents Contents 230V Interconnectable Mains Operated Alarms For modelsImportant Information Types of AlarmPower Supply Operation and L.E.D. Status How to Operate/Test the AlarmAlarm Types Battery Checking/Changing PP3 Battery type/code nosKidde Safety Europe Mathisen Way, Colnbrook, SL3 0HB, UK Good Safety Habits SectionPage What to do in an Emergency MaintenanceUseful Hints TroubleshootingSymptom Possible cause/solutions Guarantee Limitations of Smoke/Heat AlarmsService and Guarantee