BRK electronic CO2120PDN user manual Potential Sources Of CO Home

Page 16

Potential Sources Of CO

In The Home

Fuel-burning appliances like: portable heater, gas or wood burning fireplace, gas kitchen range or cooktop, gas clothes dryer.

Damaged or insufficient venting: corroded or disconnected water heater vent pipe, leaking chimney pipe or flue, or cracked heat exchanger, blocked or clogged chimney opening.

Improper use of appliance/device: operating a barbecue grill or vehicle in an enclosed area (like a garage or screened porch).

Transient CO problems: “transient” or on- again-off-again CO problems can be caused by outdoor conditions and other special circumstances.

14

The following conditions can result in transient CO situations:

1.Excessive spillage or reverse venting of fuel appliances caused by outdoor conditions such as:

•Wind direction and/or velocity, including high, gusty winds. Heavy air in the vent pipes (cold/humid air with extended peri- ods between cycles).

•Negative pressure differential resulting from the use of exhaust fans.

•Several appliances running at the same time competing for limited fresh air.

•Vent pipe connections vibrating loose from clothes dryers, furnaces, or water heaters.

•Obstructions in or unconventional vent pipe designs which can amplify the above situations.

2.Extended operation of unvented fuel burning devices (range, oven, fireplace).

3.Temperature inversions, which can trap exhaust close to the ground.

4.Car idling in an open or closed attached garage, or near a home.

These conditions are dangerous because they can trap exhaust in your home. Since these conditions can come and go, they are also hard to recreate during a CO investigation.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 120V AC 60 Hz .085A Standby .087A Alarm Model CO2120PDN-User’s ManualTable of Contents Basic Safety Information IntroductionHOW Your CO Alarm Works Cover Of Your CO AlarmGeneral Information Malfunction WarningWhat the Digital Display can Show YOU When Checking Peak CO LevelDisplay Shows What It Means What the Lights and Alarm Tones Mean During Power Up or After Power Outage During an AlarmDuring Normal Operation During Alarm Malfunction During Normal Test Using the Silence Feature in AlarmPeak CO Feature To check Peak COCO Alarm Specifications Supply Voltage 120V AC 60HzInstallation Where to Install CO AlarmsA Single-level Home A Multi-level HomeWhere not to Install Your CO Alarm Do not locate this CO AlarmHOW to Install Your CO Alarm If the Alarm Signal Sounds If Your CO Alarm AlarmsFinding the Source of CO After an Alarm Using the Silence Feature If the CO Alarm...remains silentTesting and Maintenance Weekly TestingRegular Maintenance To keep the CO Alarm in good working orderSymptoms of CO Poisoning What is CO?What You Need To Know About CO Potential Sources Of CO Home How Can I Protect My Family? UL2034 Required Alarm Points What Levels of CO Cause an Alarm?Underwriters Laboratories Inc. UL2034 Troubleshooting Guide General Limitations Of CO Alarms Limited Warranty Enterprise Court, Aurora, IL

CO2120PDN specifications

The BRK electronic CO2120PDN is a top-of-the-line carbon monoxide detector designed to enhance safety in residential and commercial spaces. Featuring advanced technology and a user-friendly design, this device effectively monitors for harmful levels of carbon monoxide, offering peace of mind to users.

One of the standout features of the CO2120PDN is its electrochemical sensor, which is known for its high accuracy and sensitivity. This type of sensor is specifically engineered to detect even the smallest amounts of carbon monoxide, ensuring that any dangerous buildup of this colorless, odorless gas is identified promptly. The electrochemical sensor also provides a rapid response time, which is crucial for alerting occupants to potential hazards before they can cause harm.

The CO2120PDN boasts a robust digital display that provides real-time information on carbon monoxide levels. This display is not only informative but also user-friendly, ensuring that even those who are not technologically savvy can easily interpret the data. In addition to real-time monitoring, the device is equipped with a memory feature that stores the highest levels of carbon monoxide detected. This can be useful for identifying trends over time and understanding potential sources of pollution.

An important aspect of the CO2120PDN is its adaptability. It can be powered by either a sealed lithium battery or AC power, providing users with options depending on their specific needs and circumstances. The battery backup ensures that the device remains operational even during power outages, a critical feature in emergencies.

The device also includes an alarm function that emits a loud, attention-grabbing tone when it detects carbon monoxide levels that exceed safe thresholds. This alarm is designed to wake sleeping individuals, providing an essential layer of safety, especially in households with children or elderly residents.

Installation of the CO2120PDN is straightforward, and it can be mounted on a wall or placed on a flat surface. The device is also lightweight and compact, ensuring that it can fit comfortably in various locations without taking up too much space.

Overall, the BRK electronic CO2120PDN stands out for its advanced sensing technology, user-friendly features, and reliable performance. Whether in a family home or a commercial establishment, this device is an essential tool for protecting against the dangers of carbon monoxide exposure. With its commitment to safety and innovation, BRK electronic continues to deliver high-quality products that meet the needs of consumers.
Top Page Image Contents