THE PEAK CO FEATURE
This feature lets you check the highest level of CO detected since you cleared the Peak memory. This feature also helps a CO investigator. Since you should ventilate your home after any
To check Peak CO: |
|
1. Press and release the | READY |
Test/Silence button |
|
until the dash scrolls to |
|
“PEAK”. |
|
TEST PEAK CLEAR
PEAK
The CO alarm will | READY | |
automatically switch back |
| |
to ”READY” immediately |
| |
after you check or clear | TEST PEAK CLEAR | |
the peak CO level. | ||
PEAK |
Examples of when to use the Peak CO Feature:
• To check if CO was detected while you |
were away on vacation. |
• To check the highest level of CO |
recorded during an alarm, especially |
if you were not home when it started |
to alarm. |
• To show an emergency responder or |
2.Press and hold the Test/Silence button to display the peak CO level.
To clear Peak CO:
1.Press and release the Test/Silence button until the dash scrolls to “CLEAR PEAK.”
READY
TEST PEAK CLEAR PEAK
READY
TEST PEAK CLEAR PEAK
qualified appliance technician the highest |
level of CO detected before they arrived. |
IMPORTANT!
DO NOT clear the peak CO reading if you plan to call someone to investigate a CO problem! Clear the peak CO reading only after the investigator has checked your home.
2. Press and hold the | READY |
Test/Silence button |
|
until the display shows |
|
“CLr.” |
|
NOTE:
The peak CO level will be saved, even after a power interruption, until you clear it.
5