BRK electronic SC1000BN user manual Carbon Monoxide Alarm

Page 6

The Carbon Monoxide Alarm (continued)

According to Underwriters Laboratories Inc. UL2034, Section 1.2: “Carbon monoxide alarms covered by these requirements are intended to respond to the presence of carbon monoxide from sources such as, but not limited to, exhaust from internal-combustion engines, abnormal operation of fuel-fired appliances, and fireplaces. Carbon monoxide alarms are intended to alarm at carbon monoxide levels below those that could cause a loss of ability to react to the dangers of carbon monoxide exposure.

This CO alarm monitors the air, and is designed to alarm before CO levels become life threatening. This allows you precious time to leave the house and correct the problem. This is only possible if alarms are located, installed, and maintained as described in this manual.

This CO alarm is designed to alert you to

a potentially dangerous build-up of CO over time. It cannot fix a CO problem, and it cannot identify a specific source of CO. The company shall not be obligated to pay for any carbon monoxide investigation or service call conducted by a Fire Department, or licensed investigator or repairman, arranged by the homeowner in response to an alarm.

4

WARNING!

This product is intended for use in ordinary indoor locations of family living units. It is not designed to measure CO levels in compliance with Occupational Safety and Health Administration (OSHA) commercial or industrial standards. Individuals with medical conditions may consider using warning devices which provide audible and visual signals for carbon monoxide concentrations under 30 ppm.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model SC1000BN-User’s Manual Table of Contents Smoke Alarm Basic FeaturesCO Alarm IntroductionBasic Safety Information Alarm Specifications Carbon Monoxide AlarmCarbon Monoxide Alarm Installation Where to Install This AlarmA Mobile Home Where not to Install this Alarm Recommended PlacementDo not locate this smoke/CO alarm Avoiding Dead Air Spaces HOW to Install this Alarm Page If Your Smoke/CO Alarm Sounds What to do FIRST-IDENTIFY the Type of AlarmIf the Alarm Sounds Finding the Source of CO After an AlarmWhat to do if Carbon Monoxide is Detected Responding to An Alarm What to do if Smoke is DetectedUsing the Silence Feature Testing and Maintenance Weekly TestingIf the alarm does not test properly Regular Maintenance To keep the alarm in good working orderProtecting Your Family Protecting Your Family From CO PoisoningProtecting Your Family from Fire What is CO? Symptoms of CO PoisoningWhat You Need To Know About CO Potential Sources Of CO In The Home Regulatory Information for CO Alarms What Levels of CO Cause an Alarm?Nfpa Standard 72 Section Regulatory Info. For Smoke AlarmsAgency Placement Recommendations California State Fire MarshallInstalling Smoke Alarms in Mobile Homes Special Compliance Considerations Single-Family ResidenceDifferent Types of Smoke Alarms Ionization Smoke AlarmsTroubleshooting Guide Problem If the CO Alarm You ShouldGeneral Limitations Of This Alarm Limited Warranty

SC1000BN specifications

The BRK electronic SC1000BN is a state-of-the-art smoke and carbon monoxide detector designed for enhanced safety in residential and commercial environments. At the heart of its design is the dual sensor technology, which combines both photoelectric and ionization detection methods. This dual system is crucial in detecting a wide range of fire types, from smoldering fires to fast flaming ones. The photoelectric sensor is particularly effective for detecting smoke from smoldering fires, while the ionization sensor effectively detects fast-flaming fires, making this detector a well-rounded solution for various fire scenarios.

A standout feature of the SC1000BN is its sealed lithium battery, which boasts a lifespan of up to 10 years. This eliminates the hassle of battery replacements and ensures that the unit remains operational for a decade. Users can feel secure knowing that the detector will function seamlessly without the need for intervention. Additionally, the detector has a convenient end-of-life signal, alerting users when it’s time to replace the unit itself, ensuring that safety is never compromised.

Another important technology integrated into the SC1000BN is its smart chip technology. This enables the detector to accurately differentiate between various potential threats, reducing false alarms and providing peace of mind to users. The device is also equipped with a loud 85-decibel alarm that ensures occupants are promptly alerted in case of an emergency.

Installation of the SC1000BN is straightforward, with a low-profile design that blends seamlessly into any environment. The unit can be mounted on ceilings or walls, and its aesthetic design complements modern home decor. Furthermore, the detector meets the strictest safety standards, including certification from Underwriters Laboratories (UL), ensuring reliability and efficacy.

In addition to its primary functions, the SC1000BN also features a test/silence button that allows users to check the functionality of the unit or silence false alarms without removing the battery. The combination of advanced detection methods, long-lasting power, and user-friendly features makes the BRK electronic SC1000BN an essential device for enhancing safety and promoting peace of mind in any space. With its commitment to advancing safety technology, BRK electronic continues to be a trusted name in smoke and carbon monoxide detection.
Top Page Image Contents