BRK electronic SC1000BN user manual Basic Safety Information

Page 4

BASIC SAFETY INFORMATION

IMPORTANT!

Dangers, Warnings, and Cautions alert you to important operating instructions or to potentially hazardous situations. Pay special attention to these items.

CAUTION!

This combination Smoke and Carbon Monoxide Alarm has two separate alarms. The CO alarm is not designed to detect fire or any other gas. It will only indicate the presence of carbon monoxide gas at the sensor. Carbon monoxide gas may be present in other areas. The Smoke Alarm will only indicate the presence of smoke that reaches the sensor. The smoke alarm will not sense gas, heat or flames.

IMPORTANT!

This smoke/CO alarm is approved for use in single-family residences. It is NOT designed for marine or RV use.

IMPORTANT!

This device is not intended to alert hearing impaired residents. Smoke alarms specifically designed for the hearing impaired, which feature devices like flashing strobe lights, are available to alert the hearing impaired in case of fire.

2

WARNING!

This smoke/CO alarm cannot operate without a working battery. Removing the battery for any reason, or failing to replace the battery at the end of its service life, removes your protection.

WARNING!

NEVER ignore any alarm. Refer to Chapter 3 for more information on how to respond to an alarm. Failure to respond can result in injury or death.

WARNING!

The silence feature is for your convenience only and will not correct a problem. See Chapter 3 for details on using the silence feature.

WARNING!

Test this smoke/CO alarm once a week. If it ever fails to test correctly, have it replaced immediately! If the alarm is not working properly, it cannot alert you to a problem.

CAUTION!

Do not paint over the smoke/CO alarm. Paint may clog the openings to the sensing chamber and prevent the sensors from operating properly.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Model SC1000BN-User’s Manual Table of Contents Basic Features CO AlarmSmoke Alarm IntroductionBasic Safety Information Alarm Specifications Carbon Monoxide AlarmCarbon Monoxide Alarm Where to Install This Alarm InstallationA Mobile Home Recommended Placement Where not to Install this AlarmDo not locate this smoke/CO alarm Avoiding Dead Air Spaces HOW to Install this Alarm Page If Your Smoke/CO Alarm Sounds What to do FIRST-IDENTIFY the Type of AlarmFinding the Source of CO After an Alarm If the Alarm SoundsWhat to do if Carbon Monoxide is Detected Responding to An Alarm What to do if Smoke is DetectedUsing the Silence Feature Weekly Testing Testing and MaintenanceIf the alarm does not test properly Regular Maintenance To keep the alarm in good working orderProtecting Your Family Protecting Your Family From CO PoisoningProtecting Your Family from Fire Symptoms of CO Poisoning What is CO?What You Need To Know About CO Potential Sources Of CO In The Home Regulatory Information for CO Alarms What Levels of CO Cause an Alarm?Regulatory Info. For Smoke Alarms Agency Placement RecommendationsNfpa Standard 72 Section California State Fire MarshallInstalling Smoke Alarms in Mobile Homes Special Compliance Considerations Single-Family ResidenceDifferent Types of Smoke Alarms Ionization Smoke AlarmsTroubleshooting Guide Problem If the CO Alarm You ShouldGeneral Limitations Of This Alarm Limited Warranty

SC1000BN specifications

The BRK electronic SC1000BN is a state-of-the-art smoke and carbon monoxide detector designed for enhanced safety in residential and commercial environments. At the heart of its design is the dual sensor technology, which combines both photoelectric and ionization detection methods. This dual system is crucial in detecting a wide range of fire types, from smoldering fires to fast flaming ones. The photoelectric sensor is particularly effective for detecting smoke from smoldering fires, while the ionization sensor effectively detects fast-flaming fires, making this detector a well-rounded solution for various fire scenarios.

A standout feature of the SC1000BN is its sealed lithium battery, which boasts a lifespan of up to 10 years. This eliminates the hassle of battery replacements and ensures that the unit remains operational for a decade. Users can feel secure knowing that the detector will function seamlessly without the need for intervention. Additionally, the detector has a convenient end-of-life signal, alerting users when it’s time to replace the unit itself, ensuring that safety is never compromised.

Another important technology integrated into the SC1000BN is its smart chip technology. This enables the detector to accurately differentiate between various potential threats, reducing false alarms and providing peace of mind to users. The device is also equipped with a loud 85-decibel alarm that ensures occupants are promptly alerted in case of an emergency.

Installation of the SC1000BN is straightforward, with a low-profile design that blends seamlessly into any environment. The unit can be mounted on ceilings or walls, and its aesthetic design complements modern home decor. Furthermore, the detector meets the strictest safety standards, including certification from Underwriters Laboratories (UL), ensuring reliability and efficacy.

In addition to its primary functions, the SC1000BN also features a test/silence button that allows users to check the functionality of the unit or silence false alarms without removing the battery. The combination of advanced detection methods, long-lasting power, and user-friendly features makes the BRK electronic SC1000BN an essential device for enhancing safety and promoting peace of mind in any space. With its commitment to advancing safety technology, BRK electronic continues to be a trusted name in smoke and carbon monoxide detection.
Top Page Image Contents