BRK electronic SC1000BN user manual Using the Silence Feature

Page 15

USING THE SILENCE FEATURE

The silence feature is intended to temporarily silence the horn while you identify and correct the problem. Do not use the silence feature in emergency situations. It will not correct a CO problem or extinguish a fire.

To use the silence feature, press and hold the Test/Silence button on the cover of the smoke/ CO alarm for 3 seconds.

WARNING!

Never remove the batteries to quiet an unwanted alarm. Removing the batteries disables the alarm and removes your protection.

When the smoke alarm is silenced....

When the CO alarm is silenced...

 

 

The smoke alarm will remain silent for up to 15

The CO alarm will remain silent for 4 minutes.

minutes and then return to normal operation.

After 4 minutes, if CO levels remain potentially

 

If the smoke has not cleared—or increases at

dangerous the horn will start sounding again.

any time,— the device will go back into alarm.

 

WARNING!

IMPORTANT!

Use the silence feature only if you are

The silence feature is intended to temporarily

certain of the source of smoke. If you are

silence the alarm horn. It will not correct a

not certain of the source or a fire starts

CO problem.

while you are clearing smoke, evacuate the

 

house immediately.

 

13

Image 15
Contents Model SC1000BN-User’s Manual Table of Contents Introduction Basic FeaturesCO Alarm Smoke AlarmBasic Safety Information Carbon Monoxide Alarm Alarm SpecificationsCarbon Monoxide Alarm Installation Where to Install This AlarmA Mobile Home Where not to Install this Alarm Recommended PlacementDo not locate this smoke/CO alarm Avoiding Dead Air Spaces HOW to Install this Alarm Page What to do FIRST-IDENTIFY the Type of Alarm If Your Smoke/CO Alarm SoundsIf the Alarm Sounds Finding the Source of CO After an AlarmWhat to do if Carbon Monoxide is Detected What to do if Smoke is Detected Responding to An AlarmUsing the Silence Feature Testing and Maintenance Weekly TestingIf the alarm does not test properly To keep the alarm in good working order Regular MaintenanceProtecting Your Family From CO Poisoning Protecting Your FamilyProtecting Your Family from Fire What is CO? Symptoms of CO PoisoningWhat You Need To Know About CO Potential Sources Of CO In The Home What Levels of CO Cause an Alarm? Regulatory Information for CO AlarmsCalifornia State Fire Marshall Regulatory Info. For Smoke AlarmsAgency Placement Recommendations Nfpa Standard 72 SectionInstalling Smoke Alarms in Mobile Homes Single-Family Residence Special Compliance ConsiderationsIonization Smoke Alarms Different Types of Smoke AlarmsProblem If the CO Alarm You Should Troubleshooting GuideGeneral Limitations Of This Alarm Limited Warranty

SC1000BN specifications

The BRK electronic SC1000BN is a state-of-the-art smoke and carbon monoxide detector designed for enhanced safety in residential and commercial environments. At the heart of its design is the dual sensor technology, which combines both photoelectric and ionization detection methods. This dual system is crucial in detecting a wide range of fire types, from smoldering fires to fast flaming ones. The photoelectric sensor is particularly effective for detecting smoke from smoldering fires, while the ionization sensor effectively detects fast-flaming fires, making this detector a well-rounded solution for various fire scenarios.

A standout feature of the SC1000BN is its sealed lithium battery, which boasts a lifespan of up to 10 years. This eliminates the hassle of battery replacements and ensures that the unit remains operational for a decade. Users can feel secure knowing that the detector will function seamlessly without the need for intervention. Additionally, the detector has a convenient end-of-life signal, alerting users when it’s time to replace the unit itself, ensuring that safety is never compromised.

Another important technology integrated into the SC1000BN is its smart chip technology. This enables the detector to accurately differentiate between various potential threats, reducing false alarms and providing peace of mind to users. The device is also equipped with a loud 85-decibel alarm that ensures occupants are promptly alerted in case of an emergency.

Installation of the SC1000BN is straightforward, with a low-profile design that blends seamlessly into any environment. The unit can be mounted on ceilings or walls, and its aesthetic design complements modern home decor. Furthermore, the detector meets the strictest safety standards, including certification from Underwriters Laboratories (UL), ensuring reliability and efficacy.

In addition to its primary functions, the SC1000BN also features a test/silence button that allows users to check the functionality of the unit or silence false alarms without removing the battery. The combination of advanced detection methods, long-lasting power, and user-friendly features makes the BRK electronic SC1000BN an essential device for enhancing safety and promoting peace of mind in any space. With its commitment to advancing safety technology, BRK electronic continues to be a trusted name in smoke and carbon monoxide detection.