BRK electronic SC1000BN user manual General Limitations Of This Alarm

Page 28

CHAPTER 10: General Limitations Of This Alarm

This smoke/CO alarm is intended for residential use. It is not intended for use in industrial applications where Occupational Safety and Health Administration (OSHA) requirements for carbon monoxide alarms must be met. The smoke alarm portion of this device is not intended to alert hearing impaired residents. Special purpose smoke alarms should be installed for hearing impaired residents (CO alarms may not be available for the hearing impaired).

This smoke/CO alarm will not work without power. This alarm requires a 9V alkaline or lithium battery to operate.

This smoke/CO alarm will not sense carbon monoxide or smoke that does not reach the sensors. It will only sense CO or smoke at the sensor. CO or smoke may be present in other areas. Doors or other obstructions may affect the rate at which CO or smoke reaches the sensors. If bedroom doors are usually closed at night, we recommend you install an alarm device (combination smoke/CO alarm, or separate smoke and CO alarms) in each bedroom and in the hallway between them.

This smoke/CO alarm may not sense CO or smoke on another level of the home. Example: This alarm device, installed on the second floor, may not sense CO or smoke in the basement. For this reason, one alarm device may not give adequate early warning. Recommended minimum protection is one alarm device in every sleeping area, every bedroom, and on every level of your home. Some experts recommend battery powered smoke and CO alarms be used in conjunction with interconnected AC powered smoke alarms. For details, see “Different Types of Smoke Alarms” (see page 24 for details).

This smoke/CO alarm may not be heard. The alarm horn loudness meets or exceeds the current UL standards. However, if the device is installed outside the bedroom, it may not wake up a sound sleeper or one who has recently used drugs or has been drinking alcoholic beverages. This is especially true if the door is closed or only partly open. Even persons

who are awake may not hear the alarm horn if the sound is blocked by distance or closed doors. Noise from traffic, stereo, radio, television, air conditioner, or other appliances may also prevent alert persons from hearing the alarm horn. This alarm device is not intended for people who are hearing impaired.

The smoke alarm may not have time to alarm before the fire itself causes damage, injury, or death, since smoke from some fires may not reach the unit immediately. Examples of this include persons smoking in bed, children playing with matches, or fires caused by violent explosions resulting from escaping gas.

This smoke/CO alarm is not a substitute for life insurance. Though this smoke/CO alarm warns against increasing CO levels or the presence of smoke, BRK Brands, Inc. does not warrant or imply in any way that they will protect lives. Homeowners and renters must still insure their lives.

This smoke/CO alarm has a limited life. Although the this smoke/CO alarm and all of its parts have passed many stringent tests and are designed to be as reliable as possible, any of these parts could fail at any time. Therefore, you must test this device weekly.

This smoke/CO alarm is not foolproof. Like all other electronic devices, this smoke/CO alarm has limitations. It can only detect CO or smoke that reaches the sensors. It may not give early warning of the source of CO or smoke is in a remote part of the home, away from the alarm device.

26

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Model SC1000BN-User’s Manual Table of Contents Basic Features CO AlarmSmoke Alarm IntroductionBasic Safety Information Alarm Specifications Carbon Monoxide AlarmCarbon Monoxide Alarm Where to Install This Alarm InstallationA Mobile Home Recommended Placement Where not to Install this AlarmDo not locate this smoke/CO alarm Avoiding Dead Air Spaces HOW to Install this Alarm Page If Your Smoke/CO Alarm Sounds What to do FIRST-IDENTIFY the Type of AlarmFinding the Source of CO After an Alarm If the Alarm SoundsWhat to do if Carbon Monoxide is Detected Responding to An Alarm What to do if Smoke is DetectedUsing the Silence Feature Weekly Testing Testing and MaintenanceIf the alarm does not test properly Regular Maintenance To keep the alarm in good working orderProtecting Your Family Protecting Your Family From CO PoisoningProtecting Your Family from Fire Symptoms of CO Poisoning What is CO?What You Need To Know About CO Potential Sources Of CO In The Home Regulatory Information for CO Alarms What Levels of CO Cause an Alarm?Regulatory Info. For Smoke Alarms Agency Placement RecommendationsNfpa Standard 72 Section California State Fire MarshallInstalling Smoke Alarms in Mobile Homes Special Compliance Considerations Single-Family ResidenceDifferent Types of Smoke Alarms Ionization Smoke AlarmsTroubleshooting Guide Problem If the CO Alarm You ShouldGeneral Limitations Of This Alarm Limited Warranty

SC1000BN specifications

The BRK electronic SC1000BN is a state-of-the-art smoke and carbon monoxide detector designed for enhanced safety in residential and commercial environments. At the heart of its design is the dual sensor technology, which combines both photoelectric and ionization detection methods. This dual system is crucial in detecting a wide range of fire types, from smoldering fires to fast flaming ones. The photoelectric sensor is particularly effective for detecting smoke from smoldering fires, while the ionization sensor effectively detects fast-flaming fires, making this detector a well-rounded solution for various fire scenarios.

A standout feature of the SC1000BN is its sealed lithium battery, which boasts a lifespan of up to 10 years. This eliminates the hassle of battery replacements and ensures that the unit remains operational for a decade. Users can feel secure knowing that the detector will function seamlessly without the need for intervention. Additionally, the detector has a convenient end-of-life signal, alerting users when it’s time to replace the unit itself, ensuring that safety is never compromised.

Another important technology integrated into the SC1000BN is its smart chip technology. This enables the detector to accurately differentiate between various potential threats, reducing false alarms and providing peace of mind to users. The device is also equipped with a loud 85-decibel alarm that ensures occupants are promptly alerted in case of an emergency.

Installation of the SC1000BN is straightforward, with a low-profile design that blends seamlessly into any environment. The unit can be mounted on ceilings or walls, and its aesthetic design complements modern home decor. Furthermore, the detector meets the strictest safety standards, including certification from Underwriters Laboratories (UL), ensuring reliability and efficacy.

In addition to its primary functions, the SC1000BN also features a test/silence button that allows users to check the functionality of the unit or silence false alarms without removing the battery. The combination of advanced detection methods, long-lasting power, and user-friendly features makes the BRK electronic SC1000BN an essential device for enhancing safety and promoting peace of mind in any space. With its commitment to advancing safety technology, BRK electronic continues to be a trusted name in smoke and carbon monoxide detection.
Top Page Image Contents