Ei Electronics Ei220EN manual Where to Place CO Alarms, Unsuitable Locations

Page 11

B15584-R0-225EN&220EN-U&C 6/9/07 8:13 AM Page 11

4.WHERE TO PLACE CO ALARMS

3.1Ideally a Carbon Monoxide Alarm should be installed in:

-Every room containing a fuel burning appliance, and

-Remote rooms where occupants spend a considerable amount of time

-Every bedroom.

However if the number of Carbon Monoxide Alarms is limited the following points should be considered when deciding where best to fit the alarm(s)

-If there is an appliance in a room where people sleep, place a CO Alarm in this room and

-Locate a CO alarm in a room containing a flueless or open-flued appliance, and

-Locate an alarm in a room where the occupant(s) spend most of their time (e.g. sitting room) and

-In a bedsit, the CO alarm should be placed as far away from the cooking appliance as possible, but near to where the person sleeps and

-If the appliance is in a room not normally used, such as a boiler room, the CO alarm should be placed just outside the room so that the alarm will be heard more easily.

3.2 Unsuitable Locations

Do not place the CO Alarm in any of the following areas.

(1)In the immediate vicinity of a cooking appliance (keep it at least 1 metre horizontally from it).

11

Image 11
Contents Instructions Contents Read this First What to do When the Alarm Sounds Carbon Monoxide the Silent Killer What is Carbon Monoxide ?High levels of CO in a house can be caused by Symptoms of Carbon Monoxide PoisoningB15584-R0-225EN&220EN-U&C 6/9/07 813 AM Table a Effects of Carbon Monoxide Poisoning What happens when your CO Alarm detects Carbon Monoxide ?Never Ignore the Alarm CO Alarm Memory Unsuitable Locations Where to Place CO AlarmsB15584-R0-225EN&220EN-U&C 6/9/07 813 AM Location in room with a fuel burning appliance Location in rooms with Installing Your Carbon Monoxide Alarms Procedure Installation ProcedureSurface Wiring Ei220EN Only Testing with Carbon Monoxide Testing Your CO AlarmMaintaining Your CO Alarm Product Disposal How to disconnect and remove the alarmEND of Life Limitations of CO Alarms B15584-R0-225EN&220EN-U&C 6/9/07 813 AM HOW to Protect Your Family B15584-R0-225EN&220EN-U&C 6/9/07 813 AM Technical Specification Sensor fault is found Guarantee Getting the CO Alarm ServicedB15584-R0-225EN&220EN-U&C 6/9/07 813 AM Alarm Sounds for no Apparent Reason TroubleshootingAlarm does not Work with the Test Button Alarm Beeps and Amber Light Flashes Every 40 SecondsRED and Amber Lights Flash TEST/HUSH Button does not Silence AlarmsEi Electronics Product Disposal