Installation, Locations To Avoid | Aico Ei164RC, Ei166RC, Ei168RC

B16008-R0-160RC SERIES-U&C 17/1/07 11:13 AM Page 9

3.1 Locations To Avoid

DON’T place Smoke Alarms in any of the following areas:

•Bathrooms, kitchens, shower rooms, garages or other rooms where the smoke alarm may be triggered by steam, condensation, normal smoke or fumes. Keep at least 6 metres away from sources of normal smoke/fumes.

DON’T place Heat Alarms in any of the following areas:

•Bathrooms, shower rooms or other rooms where the unit may be triggered by steam or condensation.

DON’T place Smoke or Heat Alarms in any of the following areas:

•Places where the normal temperature can exceed 40°C or be below 4°C (e.g. attics, furnace rooms, directly above ovens or kettles etc.) as the heat/steam could cause nuisance alarms.

•Near a decorative object, door, light fitting, window moulding etc., that may prevent smoke or heat from entering the Alarm.

•Surfaces that are normally warmer or colder than the rest of the room (e.g. attic hatches). Temperature differences might stop smoke or heat from reaching the unit.

•Next to or directly above heaters or air conditioning vents, windows, wall vents etc. that can change the direction of airflow.

•In very high or awkward areas (e.g. over stairwells) where it may be difficult to reach the alarm (for testing, hushing or battery replacement).

•Locate away from very dusty or dirty areas as dust build-up in the chamber can impair performance. It can also block the insect screen mesh and prevent smoke from entering the smoke detector chamber.

•Locate the unit at least 1m from dimmer controlled lights and wiring as some dimmers can cause interference.

•Locate unit at least 1.5m and route wiring at least 1m away from fluorescent light fittings as electrical “noise” and/or flickering may affect the unit. Do not wire into the same circuit as fluorescent lights or dimmers.

•Do not locate in insect infested areas. Small insects getting into the smoke detector chamber can cause intermittent alarms. Insects and contamination on the Heat Alarm sensor can increase its response time.

4. INSTALLATION

The Alarm is designed to be permanently mounted , using it’s own built-in terminal block to connect it to the mains. The mounting plate can be screwed directly to the ceiling. Alternatively it can be screwed to a standard junction box. It requires a current of 40mA. The Alarm must not be exposed to dripping or splashing. There are important markings on the underside of the alarm.

IMPORTANT PRECAUTION: Do not install the Alarms in new or renovated buildings until all work is completed (including floor coverings) and the building has been fully cleaned. The wiring can be installed when

Ei168RC, Ei164RC, Ei166RC, Ei161RC specifications

The Aico Ei161RC, Ei166RC, Ei164RC, and Ei168RC are a series of advanced smoke and heat alarms designed to ensure maximum safety within residential and commercial properties. These devices are equipped with innovative technologies that enhance their efficiency and reliability, making them essential components of any fire safety plan.

The Ei161RC is a versatile optical smoke alarm. It employs a highly sensitive optical sensor that effectively detects slow-burning fires, such as those caused by smoldering materials. One of its standout features is the built-in Rechargeable Lithium Cell, which offers a prolonged lifespan and ensures that the alarm remains powered even during power outages. Additionally, the Ei161RC is equipped with a test button that allows users to easily verify the functionality of the alarm.

The Ei166RC goes a step further by integrating a heat sensor alongside its smoke detection capabilities. This dual-functionality is ideal for areas where smoke may be a common occurrence, such as kitchens, as it reduces the likelihood of false alarms triggered by cooking fumes. Like the Ei161RC, the Ei166RC also features a rechargeable lithium cell, making it both efficient and environmentally friendly.

Next is the Ei164RC, which is specifically designed for residential homes and commercial settings that require the highest level of safety from carbon monoxide. This alarm combines smoke detection and carbon monoxide sensing in one unit. Its advanced sensing technology ensures rapid detection of both smoke and harmful gases, ensuring comprehensive safety. The Ei164RC has a user-friendly interface, allowing quick access to essential features.

Lastly, the Ei168RC is tailored for those who prioritize intelligent safety solutions. This alarm not only detects smoke and heat but can also integrate with other alarms in the Aico range, creating a comprehensive safety network throughout a property. Its smart interconnected technology ensures that when one alarm is triggered, all alarms in the system sound simultaneously, providing an immediate alert to occupants.

All four models in this series are designed with ease of installation in mind, featuring a compact, modern design that complements any interior. They are engineered to function reliably with a long lifespan and minimal maintenance requirements. With their intelligent features, advanced technologies, and reliable performance, the Aico Ei161RC, Ei166RC, Ei164RC, and Ei168RC alarms set a high standard for fire safety. Whether for residential use or commercial applications, these alarms provide peace of mind and active protection against fire hazards.