(C)
Screw ø4 x 20 (K) | (A) |
|
16.Place the Back Board (C) behind the stand and attach with ten screws (K).
17.Put the hooks of the End Panel (A) to the holes of the side of the piano and attach with velcro tapes. Push firmly. There is no difference between right and left panels.
18.Turn the adjuster (installed on the bottom of the Pedal
Unit) down until it makes firm contact with the floor. If the floor is carpeted, place a spiked furniture cup under the adjuster so that it makes firm contact with the carpet backing. Press any pedal with your foot. If the pedal rail flexes, lower the adjuster until flexing is minimized.
CAUTION:
Before moving your piano, turn the adjuster up so that it clears the floor.
6 | KAWAI DIGITAL PIANO CA1200, CA1000 |