REVERB (REVERB BUTTON)

Use the REVERB button to add reverberation to the sound. There are five types of reverb built-in: ROOM, STAGE, HALL, 3D ROOM, and 3D HALL.

To add reverb to the sound, press the REVERB button. The LED indicator will be turned on to indicate that the reverb is in use. Press and hold the REVERB button and the currently selected reverb type will be shown in the LCD display. To change the reverb type, use the VALUE buttons.

Reverb Type

= Room

The LCD Display shows the currently selected type

of reverb.

 

To turn off the reverb press the REVERB button again.

NOTE

The effect and reverb settings are stored with the sound. When you select

 

the same preset sound again your chosen effect will be recalled, until the

 

instrument is turned off. Once the power is turned off, the effect will be

 

reset to the factory setting unless you use the “User Memory” function to

 

save your current reverb and effect settings.

 

For more information about the “User Memory” function please see page

 

50 in this section of the manual.

Reference Section

54

KAWAI DIGITAL PIANO CA1200, CA1000

Page 58
Image 58
Kawai CA1000, CA1200 Reverb Type = Room, Save your current reverb and effect settings, This section of the manual