USER INSTRUCTIONS
10. oxygen depletion sensor
The fire is fitted with an oxygen sensitive pilot system that will act to cut off the gas supply to the fire should the oxygen in the room fall below its normal level. If the fire is turned off by this device, it usually indicates that there is a problem with the flue system, and this should be inspected by a qualified engineer. Do not attempt to use the fire until an engineer says it is safe to do so.
This device is not a substitute for an independently mounted carbon monoxide detector.
11. flame failure device
This is a safety feature incorporated in all GAZCO fires which automatically switches off the gas supply if the pilot light goes out and fails to heat the thermocouple.
12. running in
The surface coating on the coals used in your GAZCO fire will burn off during the first few hours of use, producing a harmless and temporary odour. This will disappear after a short period of use. If the odour persists, ask your installer for advice.
13. servicing
The fire must be serviced every 12 months by a qualified Gas Engineer. In all correspondence, always quote the fire type and serial number, which may be found on the data badge located on chain beneath the control valve.
14. ventilation
Any purpose provided ventilation should be checked periodically to ensure that it is free from obstruction.
15. installation details
To assist in any future correspondence, your installer should have completed the commissioning sheet at the front of this manual. In all correspondence always quote the Model Number and Serial Number.
10
