USER INSTRUCTIONS
8. LOGIC | 10 |
arrangEMENT OF fuel bed |
|
components |
|
ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS
The fuel effect and side panels in this fire are made from Refractory Ceramic Fibre (RCF), a material which is commonly used for this application.
Preventive clothing is not required when handling these |
|
|
|
|
|
| |
|
| AR1359 |
| AR1360 |
| ||
articles, but we recommend you follow normal hygiene |
|
|
|
| |||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
rules of not smoking, eating or drinking in the work area, | 8.3 Locate the top panel on top of the sides and rear by lifting | ||||||
and always wash your hands before eating or drinking. | |||||||
it up and forward inside the box, Then sliding it backwards | |||||||
To ensure that the release of RCF fibres is kept to a | |||||||
and down behind the side panels and to rest on the rear | |||||||
minimum during installation and servicing, a HEPA filtered | panel. See diagram 11. |
|
| ||||
vacuum is recommended to remove any dust accumulated |
|
|
|
|
|
| |
in and around the fire before and after working on it. |
|
|
|
|
|
| |
11 |
|
|
|
|
| ||
When servicing the fire it is recommended that the |
|
|
|
|
| ||
replaced items are not broken up, but are sealed within |
|
|
|
|
|
| |
|
|
|
|
|
| ||
heavy duty polythene bags and labelled as RCF waste. |
|
|
|
|
|
| |
RCF waste is classed as stable, nonreactive hazardous waste, and may be disposed of at a licensed landfill site.
Excessive exposure to these materials may cause temporary irritation to eyes, skin and respiratory tract; wash hands thoroughly after handling the material.
NOTE:CERAMICPARTSAREFRAGILE.THESIDEANDREARPANELS |
|
|
| |
AREREVERSIBLE. ONESIDEISPLAIN,THEOTHERSIDEISREEDED. |
|
|
| |
ONLY USE THE CORRECT TYPE AND QUANTITY OF CERAMIC |
| AR1361 |
| |
|
|
| ||
|
|
| ||
COMPONENTS. Always follow the fuel bed layout as |
|
|
| |
stated in these instructions. NEVER change the | Coal Layout | |||
layout from that shown here. | ||||
|
|
| ||
8.1Position the burner cover gasket on the burner skin
ensuring the holes align with the ports. Take care as the | 8.4 Position the flame baffle centrally on the tray and ensure |
front | the stepped lower edge engages against the rear edge of |
Diagram 9, arrow A. | the burner skin., Diagram 12. |
9 | 12 |
| |
A |
|
AR1372 | AR1362 |
|
8.2Place the rear panel against the rear of the box resting on
the shelf. Slide one of the side panels into the box ensuring | 8.5 Place the front coal centrally in the channel at the front of |
it touches the rear panel. Then gently ease the front edge | the tray, Diagram 13. The relationship between the front |
of the side panel behind the flange so it lies flat against the | coal and the flame baffle is shown in diagram 13. |
wall of the box. Repeat with the second side panel, |
|
Diagram 10. |
|
7
