Hearth and Home Technologies SILH50ENH Heater/Blower Assembly Maintenance, Maintenance Task List

Page 20

D. Heater/Blower Assembly Maintenance

Turn off the circuit breaker/unplug the heater before servicing the heater/blower assembly.

Allow heater to cool before removing.

Open the lower grille panel to view the dashboard on the heater (the lower grille may need to be removed).

Remove the four outer screws. See Figure 10.2.

Pull dashboard towards you to expose the light compartment (the light tray does not need to be pulled all of the way out of the heater).

Reach into the back of the left rear corner of the light tray and unplug wire harness from connector. To remove plug, squeeze both sides and pull.

Remove the hood by pulling it straight out.

Remove the upper grille panel/door front by lifting it up and out.

Remove the four outer screws. See Figure 10.2.

Pull the heater/blower assembly out of heater.

Slide the heater/blower assembly back into the heater, making sure that the wires do not touch the heater/blower assembly housing.

Once the front of the heater/blower assembly is fl ush with heater, reinstall the four screws removed earlier.

Replace the upper grille panel and hood.

Plug the wire harness back into the connector in the back of the left rear corner of the light tray.

Slide dashboard back into heater and make sure all wires are inside heater.

Reinstall the four screws removed earlier.

Turn on the circuit breaker or plug the heater back into the wall outlet.

Remove

Outer

Screws

Figure 10.2 Installing Heater/Blower Assembly

E. Maintenance Task List

Inspect

 

Maintenance Tasks

Glass Doors

1.

Inspect glass panels for cracks. Replace if this condition is present.

 

 

 

 

2.

Confi rm there is no damage to glass or glass frame. Replace as necessary.

 

3.

Clean glass using a non-abrasive cleaner such as Brasso©.

 

 

 

Circulation Compartment

1.

Remove any foreign objects.

 

2.

Verify unobstructed air circulation.

20

Heatilator • SILHOUETTE Series Electric Fireplace • 4030-155 Rev K • 04/05

Image 20
Contents SILH50E SILH50ENH SILH50EV SILH60E SILH60ENH Heater Serial # Model Homeowner Reference InformationListing Label Information/Location Table of Contents Listing and Code Approvals CertificationNot intended for use as a primary heat source Getting StartedImportant Instructions Tools and Supplies Needed Fire RiskFraming and Clearances Selecting Heater LocationClearances Electrocution RiskFraming 30 in. min 762 mm In. 12 in mm 305 mm 356 mm120VAC Hardwire Installation Wiring120VAC Wall Outlet Installation 240VAC Hardwire Installation Wall Switch Wiring 12VDCShock Risk Fire Risk Heater PreparationSecure and Level the Heater Finishing Checklist FinishingFinishing Material Combustible MaterialMantel Mantel SpecificationsHeater Setup Clean HeaterAccessories Remove Shipping MaterialsAccess Controls Operating InstructionsManual Controls Function of Manual ControlsHand Held Remote Control Transmitter RCE-HTL-B Optional Canadian Equipment Requirements Wall Switch ControlFCC Requirements Issues Possible Causes Solutions TroubleshootingTroubleshooting Guide Maintenance and Service Cleaning the Firebox and Control Compart- mentCleaning the Glass Doors and Back Acrylic Panel Replacing the Light BulbsHeater/Blower Assembly Maintenance Maintenance Task ListHeater Dimensions Reference MaterialsOptional Components FrontsTrim Kits SurroundsMarble Lux Service Parts SilhouetteSilhouette # Description of Part SILH50E Series SILH60E Series QtyLimited Warranty How to Obtain ServiceContact Information

SILH50E, SILH60EV, SILH50ENH, SILH60ENH, SILH60E specifications

Hearth and Home Technologies offers a variety of innovative fireplace models, including the SILH50EV, SILH60E, SILH60ENH, SILH50ENH, and SILH60EV. These models are designed to meet various heating needs while providing aesthetic appeal and advanced technology.

The SILH50EV and SILH60E models are known for their sleek, modern designs and efficient heat output. Their large viewing areas provide a stunning view of the flames, enhancing the ambiance of any space. Both models use direct vent technology, which allows for efficient combustion while minimizing heat loss. This technology ensures that the fireplace draws air from outside for combustion, thus preserving indoor air quality and improving energy efficiency.

The SILH60ENH and SILH50ENH models are specifically designed with enhanced comfort and functionality in mind. These models feature advanced blower systems that distribute heat evenly throughout the home, making them ideal for larger spaces. The ENH models are equipped with smart technology, allowing users to control the fireplace remotely via a smartphone app, adding convenience to any living environment.

The SILH60EV model stands out for its versatility and customization options. Homeowners have the choice of various log sets, flame colors, and ember bed lighting to create a personalized aesthetic. This model also integrates seamlessly with home automation systems, providing an elegant solution for modern living.

All models are constructed with high-quality materials, ensuring durability and longevity. The glass doors are designed for optimal visibility and are made from crystal-clear, heat-resistant glass, allowing for a mesmerizing view of the flames without compromising safety.

Safety features across the series include automatic shut-off systems and tempered glass to protect against burns. These fireplaces also meet stringent environmental standards for emissions, aligning with the growing demand for eco-friendly home heating options.

In summary, the SILH series from Hearth and Home Technologies offers a combination of style, efficiency, and advanced technology. From modern aesthetics to smart features and robust heating capabilities, these models are designed to enhance the comfort and ambiance of any home. Whether for a cozy evening or large gatherings, the SILH50EV, SILH60E, SILH60ENH, SILH50ENH, and SILH60EV provide reliable warmth and visual appeal.