Hearth and Home Technologies SILH60EV, SILH50ENH Wall Switch Control, FCC Requirements

Page 17

•Remote Transmitter Function

-The hand held remote transmitter is only an ON/OFF control. When the transmitter is active, the remote LED light will be RED. Upon initial use, there may be a delay of three seconds before the remote receiver will respond to the transmitter. This is part of the system’s design.

-With the main power switch (located on the heater system) in the “ON” position, press the ON button on the hand held remote transmitter to turn on the heater. The transmitter does not control/change the other switches or controls located on the heater. Features of the heater (fl ame motion and heater system) will remain in their last set position. If you would like to change the setting you will have to access the manual controls (located on the heater) to set the desired position.

-To turn off the heater, press the OFF button on the hand held remote transmitter.

C. Wall Switch Control

(hardwired heaters only) (WSK-21 & WSK-21-W)

•The wall switch wiring can be found in the Section “4. Wiring”.

•The wall switch has an operating voltage of 12VDC, do not hook up to 120/240VAC. For installations you can use 24AWG thermostat wire connected to a standard wall switch. It is recommended not to exceed 15 ft of wire from heater.

•With the main power switch (located on the dashboard) in the “ON” position, the wall switch can turn the heater on and off. The wall switch does not control the other switches or controls located on the dashboard. Features of the heater (flame motion and heater/blower assembly) will remain in their last set position. If you would like to change the setting, you will have to access the manual controls (located on the heater) to set the desired position.

•The heater must be turned on and off by the wall switch.

D. FCC Requirements

If this equipment does cause harmful interference to radio or television reception, which can be determined by turn- ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio or TV technician for help.

Canadian Equipment Requirements

This digital apparatus does not exceed the Class A/Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This device complies with RSS-210of Industry and Science Canada. Operation is subject to the following two conditions:

1)This device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Heatilator • SILHOUETTE Series Electric Fireplace • 4030-155 Rev K • 04/05

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents SILH50E SILH50ENH SILH50EV SILH60E SILH60ENH Heater Serial # Model Homeowner Reference InformationListing Label Information/Location Table of Contents Certification Listing and Code ApprovalsNot intended for use as a primary heat source Getting StartedImportant Instructions Fire Risk Tools and Supplies NeededSelecting Heater Location Framing and ClearancesClearances Electrocution Risk30 in. min 762 mm In. 12 in mm 305 mm 356 mm Framing120VAC Hardwire Installation Wiring120VAC Wall Outlet Installation Wall Switch Wiring 12VDC 240VAC Hardwire InstallationShock Risk Fire Risk Heater PreparationSecure and Level the Heater Finishing Finishing ChecklistFinishing Material Combustible MaterialMantel Specifications MantelClean Heater Heater SetupAccessories Remove Shipping MaterialsOperating Instructions Access ControlsManual Controls Function of Manual ControlsHand Held Remote Control Transmitter RCE-HTL-B Optional Canadian Equipment Requirements Wall Switch ControlFCC Requirements Issues Possible Causes Solutions TroubleshootingTroubleshooting Guide Cleaning the Firebox and Control Compart- ment Maintenance and ServiceCleaning the Glass Doors and Back Acrylic Panel Replacing the Light BulbsMaintenance Task List Heater/Blower Assembly MaintenanceReference Materials Heater DimensionsFronts Optional ComponentsSurrounds Trim KitsMarble Lux Silhouette Service Parts# Description of Part SILH50E Series SILH60E Series Qty SilhouetteHow to Obtain Service Limited WarrantyContact Information

SILH50E, SILH60EV, SILH50ENH, SILH60ENH, SILH60E specifications

Hearth and Home Technologies offers a variety of innovative fireplace models, including the SILH50EV, SILH60E, SILH60ENH, SILH50ENH, and SILH60EV. These models are designed to meet various heating needs while providing aesthetic appeal and advanced technology.

The SILH50EV and SILH60E models are known for their sleek, modern designs and efficient heat output. Their large viewing areas provide a stunning view of the flames, enhancing the ambiance of any space. Both models use direct vent technology, which allows for efficient combustion while minimizing heat loss. This technology ensures that the fireplace draws air from outside for combustion, thus preserving indoor air quality and improving energy efficiency.

The SILH60ENH and SILH50ENH models are specifically designed with enhanced comfort and functionality in mind. These models feature advanced blower systems that distribute heat evenly throughout the home, making them ideal for larger spaces. The ENH models are equipped with smart technology, allowing users to control the fireplace remotely via a smartphone app, adding convenience to any living environment.

The SILH60EV model stands out for its versatility and customization options. Homeowners have the choice of various log sets, flame colors, and ember bed lighting to create a personalized aesthetic. This model also integrates seamlessly with home automation systems, providing an elegant solution for modern living.

All models are constructed with high-quality materials, ensuring durability and longevity. The glass doors are designed for optimal visibility and are made from crystal-clear, heat-resistant glass, allowing for a mesmerizing view of the flames without compromising safety.

Safety features across the series include automatic shut-off systems and tempered glass to protect against burns. These fireplaces also meet stringent environmental standards for emissions, aligning with the growing demand for eco-friendly home heating options.

In summary, the SILH series from Hearth and Home Technologies offers a combination of style, efficiency, and advanced technology. From modern aesthetics to smart features and robust heating capabilities, these models are designed to enhance the comfort and ambiance of any home. Whether for a cozy evening or large gatherings, the SILH50EV, SILH60E, SILH60ENH, SILH50ENH, and SILH60EV provide reliable warmth and visual appeal.
Top Page Image Contents