Hearth and Home Technologies GBI25 operating instructions Contents

Page 2

 

GBI25 SERIES B-VENT GAS FIRED FIREPLACE INSERT

 

Contents

 

A.

Listings and Code Aprovals

3

B.

Description of the System

3

C.

System components

4

D.

Dimensions and Clearances

4

E.

Pre-Installation Preparation

5

F.

Step-by-Step Installation of the System

6

G.

Operating Instructions

14

H.

Maintenance Instructions

16

I.

Troubleshooting

17

J.

Replacement Parts

18

K. Optional Components

19

 

Index

23

 

Warranty

24

CAUTION:

Do not expose the appliance to the elements (such as rain, etc.)

SAFETY PRECAUTIONS

1.Please read these installation instructions completely before beginning installation procedures. Failure to follow them could cause a malfunction resulting in serious injury and/or property damage.

2.Installation and repair should be done by a qualified service person. This appliance should also be inspected annually by a qualified service person. More frequent inspections/cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that the control compartment and burners of the appliance be kept clean.

3.The GBi25is a vented gas appliance. Do not burn wood or other material in this appliance.

4.NEVER leave children unattended when there is a fire burning in the fireplace.

5.This appliance must be vented with a minimum 4” B- Vent system and must terminate above the roof line. Venting must not be connected to a chimney flue servicing a solid fuel burning appliance.

6.Use only the fuel gas specified on the rating label of this gas appliance.

7.The appliance area shall be kept clear and free from combustible materials, gasoline and other flammable vapors and liquids.

8.While servicing this appliance, always shut off all electricity and gas to the appliance. This will prevent possible electrical shock or burns. Also, make sure the fireplace is completely cooled before servicing.

9.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

10.Be sure to provide adequate clearances around the air openings into the combustion chamber and adequate accessibility clearances for servicing and proper operation.

11.Provisions shall be made to provide adequate combustion and ventilation air. The flow of combustion and ventilation air should not be obstructed.

26678 Rev H

2

02-02

Image 2
Contents GBi25 Series Vent GAS Fired Fireplace Insert Room HeaterContents Listings and Code Aprovals Description of the SystemMantel Dimensions and ClearancesSystem Components GAS Pressure PRE-INSTALLATION PreparationHigh Altitude Installation ComponentsVenting Requirements STEP-BY-STEP Installation of the SystemGAS Line Installation Firebox Entry Appliance InstallationLabel Installation of Appliance Surround InstallationElectrical Grounding Instructions Valve Access Rock Wool PlacementBrass Trim Cleaning Log Assembly Removal Firebox Bottom RemovalWiring Wiring DiagramPRE-USE Checklist Optional Wall ThermostatFor Your Safety Read Before Lighting Operating InstructionsSeasonal Shutdown Operation Procedure During Regular USEShutdown During Regular USE FAN OperationMaintenance Instructions Troubleshooting Replacement Parts GBi25 Log AssemblyOptional Components Remote Control with Thermostat ControlBattery Operated Remote Control With Thermostat Control HOMEOWNER’S Notes HOMEOWNER’S Notes HOMEOWNER’S Notes Index How to Obtain Service Limited Lifetime WarrantyYear Limited Warranty Conditions, Exclusions, & Limitations of Liability

GBI25 specifications

Hearth and Home Technologies has garnered a strong reputation for producing high-quality, efficient, and stylish heating solutions for homes, and the GBI25 model exemplifies this commitment. The GBI25 is a gas-burning insert specifically designed to fit seamlessly into existing masonry fireplaces, transforming traditional hearths into modern heating powerhouses while preserving the aesthetic appeal of classic designs.

One of the standout features of the GBI25 is its high-efficiency performance. With an impressive efficiency rating, this insert is constructed to ensure that more heat is generated from less energy, allowing homeowners to enjoy cozy warmth while keeping fuel costs down. The insert’s high BTU output makes it suitable for heating a range of spaces, providing a perfect option for those looking to enhance their living environments.

The GBI25 is equipped with advanced technology that includes an integrated electronic ignition system. This feature simplifies the lighting process, eliminating the need for matches or kindling. Furthermore, the insert is designed with a variable speed blower that can be adjusted according to the homeowner's needs, distributing heat evenly and efficiently throughout the room.

Aesthetically, the GBI25 does not compromise on style. It offers a range of customizable options, including various front designs, finishes, and decorative elements. Homeowners can choose from classic arched or modern linear styles, allowing the insert to blend seamlessly with any décor. The realistic log set and glowing ember bed enhance the visual warmth of the fire, creating a captivating centerpiece in any living space.

Safety remains a top priority with the GBI25. It comes with a built-in safety shut-off system, ensuring peace of mind during operation. Additionally, the insert is equipped with a glass front, which prevents direct contact with the flames, making it safer for homes with children and pets.

Overall, the Hearth and Home Technologies GBI25 gas insert combines efficiency, safety, and style, making it a stunning and practical choice for homeowners looking to elevate their living spaces. Whether for ambiance or heating, the GBI25 provides an exceptional solution for enjoying the comfort of a stylish fire.