Hearth & Home Technologies Inc. 800 W.
Jefferson, Lake City, MN 55041.
G. FINISHING
Combustible Finishing Material
Materials made of or surfaced with wood, compressed paper, plant fibers, plastics or any material capable of igniting and burning, whether flame proofed or not, plastered or unplastered (this includes drywall).
Noncombustible Finishing Material
Materials which will not ignite and burn. Such materials are those consisting entirely of steel, iron, brick, tile, concrete, slate, glass or plasters or combinations thereof, or have a UL Fire rating of Zero (0).
WARNING!
Grilles on this appliance cannot, in any way, be cov- ered as it may create a fire hazard.
Note: The remote wall switch (hard wired appliances only) must be wired prior to applying the finishing material in order to avoid reconstruction.
Figure 5 - Finishing Materials
Finishing Checklist
1.Power supply service must be either completed or placed within the appliance prior to finishing to avoid reconstruction. Wall switch wires (hardwired appliances only) must also be completed to avoid reconstruction. See Section “F. Wiring”.
2.Combustible material may cover the black outer surface by ½” on the 110/120V appliances only. See Figures
Grilles and air openings cannot be covered in any circumstances.
3.Noncombustible material may cover all black outer surfaces. Grilles and air openings may not be covered.
4.Protective cover may stay on during framing, but removed before final finishing. Once final finishing has been completed, the protective cover can be used to protect appliance until final installation is complete.
Figure 6 - Combustible Finishing Material
(for 110/120V appliances)
Figure 7 - Combustible Finishing Material
(for 208/220/240V appliances)
9 | CRESTFIRE SERIES ELECTRIC FIREPLACE |
10/03